Yes and no. In order for it to work electrically then your replacement part has to have the same or higher voltage rating, The same value rating is also important (micro farads). And it has to be the same type either AC or DC. A lot of DC capacitors are polarity sensitive and will only successfully work when hooked up in the same polarity. Also keeping the same type of chemistry is important. If the Original type is Electrolytic, Tantalum, Mylar, Silver Mica and so on then pick a replacement part that is the same chemistry as the original. In some applications if you're replacing an existing part with a new one you may have to choose a part that will physically fit and attach in the same way the original part did.
because normal capacitors does not have any polaririties.
Capacitors are generally located in Electrical & Electronic Equipments..
Ceramic capacitors, film capacitors, multi-layers ceramic capacitors, electrolytic capacitors, mica capacitors, super capacitors, etc. -- We're JYH HSU(JEC) Electronics Ltd (or Dongguan Zhixu Electronic Co., Ltd.), an electronic components manufacturer. You may google search "JYH HSU" to find our official website.
Capacitors are said to be connected together "in parallel" when both of their terminals are respectively connected to each terminal of the other capacitor or capacitors. The voltage (Vc ) connected across all the capacitors that are connected in parallel is THE SAME. Then,Capacitors in Parallel have a "common voltage" supply across them giving: VC1 = VC2 = VC3 = VAB = 12V
A capacitor that does not have a designated + and - side. Electrolytic capacitors are usually polarized. Ceramic capacitors are not.
Batteries and capacitors serve quite different purposes and are usually not interchangeable.
The capacitors those are polarity sensitive are called electrolytic and tantalum capacitors. These capacitors are labeled as positive and negative.
Capacitors are rated in Microfarads
because normal capacitors does not have any polaririties.
Film capacitors cannot be replaced with ceramic or mica capacitors if used for analog signal processing. However, mica capacitors can be replaced with ceramic capacitors in general.
Replaced capacitors that are no lomger capacitors.
Nokian Capacitors's population is 290.
Nokian Capacitors was created in 1957.
Mostly the leakage of capacitors is due to the resistor.
Capacitors are generally located in Electrical & Electronic Equipments..
Yes.
Capacitors store charge. There are many applications for their use. There is no set amount of capacitors in a circuit since it is application dependent.