0
yes
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
Why does your scope on your gun keep tilting?
The screws fastening the scope ring mounts on to the scope may be loose. To find out if screws loose: Grasp scope. Attempt to turn lightly. If scope does not turn, screws sufficiently tight to hold scope securely. Nothing more needed to do If scope does turn, screws not tight enough to hold scope in place. To remedy this: 1.look at the space between scope ring halves: the space should be even on both sides and for the front and back rings loosen or tighten screws to make slots even 2.level firearm 3.level scope 4.lightly tighten screws 1/8 turn at a time using fingertip pressure only scope may rotate to one side when screws are tightened. To find out if this is happening look through scope to see if reticule still level. 5. Scope level using fingertip pressure tighten screws until screws do not move anymore. 6.Scope reticule rotated loosen all screws until scope just moves rotate scope the same amount moved in the opposite direction do steps 4 and 5
How do you put a scope on a crosman tac 77 elite air rifle?
Most people have trouble mounting scopes. 1. Mount the rear scope base ring on the rifle first. Just the bottom half. Make it tight 2. Mount the front bottom half of the scope ring next. Use the scope to align the fit to your eve. Do not mount the top of the scope rings in this step. 3. with the scope adjusted to your eye mount the top of the scope rings but not real tight just snug. Look through the scope to make sure the cross-hairs are aligned with the barrel. 4. with an Allen wrench or screwdriver tighten down the rings using a crossover pattern. (left rear screw. front right screw. right rear screw. left front screw) a little at a time until tight. ) Now do the same to the other scope ring. Do not over tighten and strip out the screw holes. 5. most people try to put the rings on the scope first then try to put in on the rifle. This never works it will always come loose. The scope ring bases have to be mounted on the rifle first, then the scope comes last. your next step is aligning the scope to your target but you didn't ask about that so I'll leave that for another question
What are the release dates for Forensic Files - 2000 Tight-fitting Genes?
Forensic Files - 2000 Tight-fitting Genes was released on: USA: 2005
What rhymes with 'a tight-rope'?
a night scope
A tight fitting covering for a foot or leg?
stocking
A tight-fitting covering for the foot or leg?
stocking
Scope Mounts - Getting what you pay for?
What is a scope mountYou are a hunter, or new to hunting. After finding the rifle you want and the scope you want, you still need to mount the scope to the rifle. Scope mounts hold the scope securely to the rifle.Getting what you pay forBuying a rifle and scope is much like finding a wife, it is strictly a matter of personal taste. Too frequently new hunters will spend exorbitant amounts on the rifle and scope, but skimp on the mounts. This is a costly mistake.The mounts hold your scope securely and help keep your scope true. If you are willing to drop several hundred to thousands of dollars on a scope, the least you should do is consider quality scope mounts. The rifle is only as good as the person behind it, but the finest shooter in the world will miss if the scope is not spot on. Quality, durable mounts will last the life of the rifle, scope and possibly outlast the owner.How to mount scope mountsMore often than not the gun shop where you buy your new rifle will mount your scope for you at no charge. If you are a do it yourself type, here are a few suggestions.Place the bases on the rifle. Check and be absolutely certain they are straight. Tighten them hand tight with the hand tools provided with the mounts. Put your scope in the mounts. Check your eye relief. This is the distance from the optical part of the scope to your eye. Too far and you will not be able to see out of the scope correctly. Too close and when you sight it in for the first time, you are going to have a black eye and possibly need stitches.Once your eye relief is set and you are happy, put the top part of your mounts on your scope. Place the screws in the holes and tighten. As you tighten the screws, tighten each one a bit at a time to be sure the mount is secured evenly. Before the final tighten, check your scope to make sure it is level. Finish and go sight in!
How to install a rifle scope?
Here's the basics on mounting the scope on a rifle. ( Assuming you have a scope mount on the rifle.) 1. Place the bottom half of the scope rings on the rifle first (Without the scope attached.) 2. Place the scope on the bottom half of the rings and adjust the scope mounts to comfortably fit your eye. When adjusted, tighten down the bottom half of scope rings to the rifle mount. ( The scope should have one cross hair adjustment at the top and one on the right.) 3. Place the scope in the rings and then put the top half of the rings on. Tighten them down, but not VICE tight, just loose. You still want to move the scope some. 4. Look through the scope and align the cross hairs level with the rifle barrel. The Vertical line should be straight up and down at a right angle with the barrel. 5. when you have the scope adjusted to your eye and the barrel of the rifle, tighten the top scope rings in a crisscross pattern a little at a time. Don't vice one down then go to the next one. Do it a few turns on each one until they are tight. A final note. If you have a small screw hole and screw at the back end of the scope mount (on the rifle) you may want to place the rear scope ring against that screw. This is a scope stop. This will keep the scope from moving back from the recoil. Some scope mounts have a long pad at the rear of the scope mount that acts the same way. It's usually necessary on high powered rifles not 22's.
What is the name for riding breeches loose fitting around the hips and tight fitting from the thighs to ankles?
Jodhpurs
What does cossies mean?
A tight fitting garment worn for swimming
What is the tight-fitting membrane that covers the surface of the bone?
The priosteum
What is the tight fitting membrane that covers the surface of bones?
The priosteum
