It depends... if the air conditioner has a slide out chassis, then yes you can. If the air conditioner is a fixed chassis (the guts don't slide out of a sleeve) then you are taking on some risks. First of all, the louvers on the side of the AC will probably get partially blocked by your wall, causing it to lose efficiency, overheat, allow moisture into your walls potentially causing mold problems. Installing a fixed chassis through the wall would also void your manufacturer's warranty. Servicing the AC would be a nightmare as well.
The bottom line is, while it's certainly possible to physically do it, it's not necessarily a good idea. Look for a slide out chassis when doing this and you'll avoid a lot of problems. Most "big box" stores like Home Depot and best buy don't have slide out chassis models in low BTU's, so you'll have to look around smaller mom and pop style appliance stores.
Nope
yes but it depends to the area that you installed window type air condition
form_title=Window A/C Unit Installation form_header=Keep cool during the summer with an A/C unit! Where will the air conditioner be installed?*= () In window opening () Wall mounted Is there an electrical power source available near the air conditioner?*= () Yes () No
A window air conditioner must be fitted in the window. The back end generates hot air and some drip water. Some can fit in a wall but still the back half is outside.
in the window, plugged into the wall. turn it on, and enjoy.
Yep. You get it in there. you can use a central unit if you can get it in there.
Absolutely not!! It will ruin it. It is designed to work in a wall in a horizontal position. The compressor depends on internal oil to keep itself lubricated and cool ,,,,The oil will plug up the compressor and just not work.
The basic air conditioning units are either wall, window, portable or central units. Window units are placed in the window, wall units are installed in the wall, portable ones are usually powered with electricity and can be moved wherever needed. Central air conditioning units can cool an entire house instead of just one small area.
With a little skill and knowledge you cut a hole through an out-side wall.
Not necessarily. You want to make sure that the window unit has a slide out chassis. Most small window units are not. The problem with air conditioners for the window where you can't slide the guts out of the sleeve means that they usually have ventilation fins on the side which could be blocked by the wall depth. If the wall blocks part of the fins, then moisture is allowed inside the wall, which could lead to problems down the line. The main problem with blocking the side fins, are that the unit won't breath correctly. This will lead to a less efficient machine in turns of BTU output of cooling and will consume more energy. The parts inside can overheat and can potentially be a fire hazard. At the very least, the unit will die prematurely. Besides that, also take into consideration that window units installed in the wall are not installed to "manufacturer's specifications" and the warranty will probably be void if the manufacturer finds out about it's installation. Finally, if the unit should require maintenance or service, you can't easily remove the unit without leaving a gaping hole in the wall. If you have a slide out chassis unit, the sleeve can be left in the wall and capped while the chassis/guts are being serviced.
It is a matter of preference. However, you do not want a wall air conditioner to be too close to the floor. Usually they are installed about two inches from the ceiling or so.
Usually the manner in which the unit vents. Window air conditioners are contained in a case that has vent holes on the top and side while wall air conditioners are vented in the rear.