No
A purely resistive load is one in which there is no capacitive or inductive reactance. Whe driven by an AC voltage source, such a load will have no shift in phase angle between voltage and current.
non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.
no
A load, at low frequencies, can be either capacitive, resistive, or inductive. At high frequencies, all three aspects exist. At low frequencies (say <= 10 MHz), a capacitive load is a capacitor, represented by an ideal cap, the MOScap, or a junction cap. An unintentional capacitive load would be the wire or conductor to another wire or conductor or ground. At high frequencies (say >= 1 GHz), all things have a capacitive nature. The higher the frequency, the worst is the capacitive leak A capacitive load means just that the load acts like a capacitor load as opposed to a inductor or resistive load
In a pure (ideal) capacitive circuit, current leads voltage by 90 degrees.
A transformer is fundamentally a set of coils; therefore, a transformer is an inductive load. However, by "transformer load", you seem to mean "the load that is connected to a transformer". Whether that load is inductive or capacitive depends mostly on what is hooked up to the transformer.
No because the very first component in the power supply is a transformer, which makes for it being an inductive load.
Power factor is determined by the nature (resistive, inductive, capacitive) of a load, not whether it is a low load or a high load.
capacitive reaction
A purely resistive load is one in which there is no capacitive or inductive reactance. Whe driven by an AC voltage source, such a load will have no shift in phase angle between voltage and current.
non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.
non- inductive load is without motor and transformer loads are non-inductive load, purely resistive are capacitive loads phase angle is unity are leading PF A non-inductive load is a load whose current does not change instantaneously.
three phases
if the load is capacitance then reactive power is injected in the circuit, as we know that reactive power is directly proportional to the voltage, if there is increase in reactive power automatically voltage at load end of the tranformer is increases
no
A load, at low frequencies, can be either capacitive, resistive, or inductive. At high frequencies, all three aspects exist. At low frequencies (say <= 10 MHz), a capacitive load is a capacitor, represented by an ideal cap, the MOScap, or a junction cap. An unintentional capacitive load would be the wire or conductor to another wire or conductor or ground. At high frequencies (say >= 1 GHz), all things have a capacitive nature. The higher the frequency, the worst is the capacitive leak A capacitive load means just that the load acts like a capacitor load as opposed to a inductor or resistive load
capacitor bank