No. If you do, you'll make a waste product that is hard to get rid of.
You have a contradiction ! - Latex primer CAN NOT BE oil based.
Dont mix linseed oil and latex primer. Latex = Waterbased, Linseed Oil = Oil based Don't mix oil and water, unless you are making salad dressing.
Not the original solvent based Thompsons Water Seal. Latex primer is water based and oil and water don't mix; they would seperate.
Either oil or latex primer can be used over interior latex paint.
Not directly. You will need to use a primer made to adhere to oil and will accept a latex topcoat.
It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer It depends what kind of finish you will put on it, and whether it will be indoors our out: Indoors, latex paint: use latex wood primer Indoors, varnish: no primer required but can be stained, may need multiple coats Indoors, oil base: use an interior oil base primer Outdoors, latex paint: use an exterior latex wood primer Outdoors, varnish: no primer required but can be stained, use exterior varnish Outdoors, oil base: use an exterior oil base primer
I would use Kilz latex primer.
Yes, but you can not put latex over oil without a primer coat between.
Yes you can.
Yes it will.
yes Yes, an oil paint will adhere to latex. It doesn't work in reverse, latex will not adhere to oil that is dry, but oil adheres to dry latex. If you were a purist, though, you would sand down the woodwork before repainting it. That would give the best result.
Oil based primer is the best bridge between oil and latex paints. If oil based paints are not available in your area, a high adhesion acrylic primer over a well prepared surface will also work.