For instance: A microphone rated at 150 ohms to 300 ohms is considered low impedance. About 600 to 2 000 ohms is medium impedance, and 10 000 ohms or more is high impedance.
because it has high input impedance and low output impedance
FET s have very high input impedance when compared with Bipolar transistors.
That depends on the output impedance. In electronic we use voltage bridging, that is a relative low output impedance to a higher input impedance. Usualy the input impedance is more than ten times higher then the output impedance. An input impedance is called also a load impedance or an external impedance. An output impedance is called also a source impedance or an internal impedance.
Digital voltmeter has high input impedence.
It depends on the resistance level in that area if the soil have low resistance then they will use high impedance system and vice versa..so reason behind this have to reduce fault current.
There is no precise definition, but for instance: A microphone rated at 150 ohms to 300 ohms is considered low impedance. About 600 to 2 000 ohms is medium impedance, and 10 000 ohms or more is high impedance.
V-Drums, for instance, have an output of 330 ohms, making them low- medium-impedance.
no. input impedance is low & output impedance is high
because it has high input impedance and low output impedance
High gain high input impedance low output impedance
FET s have very high input impedance when compared with Bipolar transistors.
That depends on the output impedance. In electronic we use voltage bridging, that is a relative low output impedance to a higher input impedance. Usualy the input impedance is more than ten times higher then the output impedance. An input impedance is called also a load impedance or an external impedance. An output impedance is called also a source impedance or an internal impedance.
An earth orbit that is lower to earth then both a medium and high earth orbit.
main volage
Digital voltmeter has high input impedence.
in what situation the company follow low medium or high medium payout ratio
It depends on the resistance level in that area if the soil have low resistance then they will use high impedance system and vice versa..so reason behind this have to reduce fault current.