Divide 18.2 cu.ft. by its length in feet and after that by its height in feet and you will have its width in feet.
That is the internal dimensions of 18.2 cu.ft. of something that resembles a box.
Three dimensions are required here for a volume quantity.
various sizes to suit your domestic requirements, you will have to visit a store. But anything from 2 or 3 cubic feet upwards
You can't convert cubic feet to square feet.
Rated on the internal dimensions.
eg: 2 feet wide * 2 feet deep * 4 feet high = 2 * 2 * 4 = 16 cu. ft. (capacity)
That means it has a usable volume of 18 cubic ft.
2.8 cubic feet !
That's the capacity.
Assuming that the dimensions given are in feet, the answer is 120 cubic feet ( 15 x 4 x 2 = 120).
You need three dimensions; length, width and height. Then multiply them together to get cubic feet.
There is no sensible answer to this question. A square foot is a measure of area, with dimensions [L2]. A cubic foot is a measure of volume, with dimensions [L3]. Basic dimensional analysis teaches that you cannot convert between measures with different dimensions without additional information.
1). There is no such unit as "cubic square feet". 2). You can't tell the dimensions from the area. There are an infinite number of different shapes and sets of dimensions that all have the same area.
1.7 cubic feet = 48.14 liters.
If those dimensions are feet, that's 2853.125 cubic feet. If those dimensions are inches, that's 1.65 cubic feet.
Cubic feet measure volume. It is not possible to measure the number of feet in cubic feet. Cubic feet are in three dimensions. Feet are in one dimension. (And square feet are in two dimensions.)
If the given dimensions are in feet then 36*33*70 = 83,160 cubic feet
If the given dimensions are in feet then 18*8.7*9 = 1409.4 cubic feet
If the dimensions are in feet then: 69*35*34 = 82,110 cubic feet
You cannot work backwards from cubic feet to square feet without additional dimensions.
According to Kenmore, the cubic feet of their refrigerators is indicated by the third digit following the decimal point. For the model #106.56369400, therefore, it would be 3 cubic feet.
Square feet have dimensions L2 while cubic feet have dimensions L3 so they are not interchangeable.
Convert all dimensions to feet, then multiply Length x Width x Height to get cubic feet.
If the given dimensions are in feet then there are: 20*20*20 = 8,000 cubic feet
The area of an object in three dimensions will be measured in cubic feet. 1600 cubic feet.
You cannot do this as cubic feet is volume, not length. You need to know distances in three dimensions.