Pure water does not have any anti corrosion or lubricant properties and should only be used in an emergency.
Pure water does not have any anti corrosion or lubricant properties and should only be used in an emergency.
Pure water does not have any anti corrosion or lubricant properties and should only be used in an emergency.
Always use antifreeze. Water does not have any water pump lubricants or anti corrosion properties, antifreeze coolant does.
It uses a 50/50 mix of water and antifreeze/coolant
A sentence for the word antifreeze may be, " What is the best antifreeze to use in drinking water?" Antifreeze is a liquid which is used to lower the freezing point.
Yes, but. Antifreeze is also a corrosion inhibitor. It protects the engine and head gasket from corrosion problems. It is far better, and safer to use a 50/50 antifreeze and water mix in the engine.
You want to use a 50/50 mixture of water and antifreeze, but use the manufacture recommended antifreeze, it comes straight anti freeze in which case you would mix a gallon of antifreeze to a gallon of water or you can buy a pre mixed container of antifreeze if your just trying to top off
use half water half antifreeze to the fill level
A Blaster is air cooled, not water cooled. no antifreeze.
distilled water is recommended
It will use normal antifreeze and it should be mixed 50/50 with water. It does not matter.
Refer to owners manual and if using water to dilute use distilled water
50 / 50 mix of antifreeze and preferably distilled water Ford states not to exceed 60 % antifreeze in cold climates and not to use less than 40 % antifreeze for corrosion protection
it would make the antifreeze work more efficiently but you can. but why would you when water is free? 50/50 mixture is usually recomended