if all the pipes in the house are the same size the easy answer is adjust the outflow valve on the hotwater tank until it matches the cold water pressure.
a cold shower
Run a new cold supply line from the source. This will drain less pressure from the the cold shower line.
Is there a mains cold and gravity hot mixer shower on the market?
A hot shower always makes me feel better.
Hot because the hot will burn the germs off of your body
The piping has to be the exact same length for each shower head from the tee where the cold and hot water feeds from the top of the diverter faucet.
A cold shower will help to bring down a fever.
a cold shower it helps to decrease frizz in your hair and it opens up your pores when you was your face and shave
Yes, a cold shower can get you clean, but a hot shower with soap with help to kill any germs that you are carrying.
Pressure is the same whether hot or cold.
the water is hot. when we get out we're hella cold
Your water pressure is low. Consequently, when cold water is diverted to another application such as a toilet or a sink, the amount of cold water available at the shower mixing valve decreases as the low pressure is unable to keep up with the shower's demand. This causes a hotter mixture at the shower head. The solution is to either improve the cold water supply to the shower or to replace the shower control valve with a temperature compensating type. Pressure balancing is the cheapest and simply changes the shower temperature according to the pressure in the cold and hot water lines. When the toilet or sink is used, reduced pressure to the shower valve is detected and the valve reduces the hot water pressure, thereby maintaining the temperature. The more sophisticated approach is a thermostatic shower control valve. These are significantly more expensive, but will not reduce the pressure at the shower head (a drawback of the pressure balancing valve). The thermostatic valve would be required when one shower control valve is operating several shower heads. Moen, Kohler and Delta all make both types of control valves. They can be readily obtained from a local plumbing supply house.