I am a plumber but I need more details to solve your problem.
A turbine or water wheel,
The water turns from a liquid to a solid
Vapor
"8 seconds" is not a velocity.
Potential energy in the reservoir of water is turned into kinetic energy as the water rushes down to the turbines where it's turned into electric energy and fed into the national grid.
Find the common factors of 3 and 8.3, 6, 9, 12, 15, 18, 248, 16, 24So the answer is 24 seconds.
Its a loss in water pressure to the shower.
Distilled water is water that has been distilled, or put another way, water that has been turned to a vapor (steam), and then condensed back to liquid water. It is a means to purify the water.
probably fresh water or salt
Distilled water is water that has been distilled, or put another way, water that has been turned to a vapor (steam), and then condensed back to liquid water. It is a means to purify the water.
It means you have a cross connection, usually at a tub/shower diverter
Well if you changed the PH of water, it wouldn't be water anymore because you'd have to add something to it which would make it another substance, so no.
I bet somewhere in the faucet the installer used a black iron nipple for the spout or shower head. The nipple rust very quickly. A few seconds of water rinses it out. The nipple will start leaking in the future.
In general, the hardness of municipal water has little effect on the color of hair dye or on how long it lasts.
If you have an instantaneous hot water heater, and your faucet doesn't flow enough water it won't turn on the water heater. Thus requiring another faucet to be turned on.
Not normally - without the water flowing from the meter, water cannot be consumed within the home, so the level inside the water heater will remain as it was before the water meter was turned off. It is common sense to remove power or shut off the gas to the water heater when another utility is shut down.
after 30 seconds the temperature of the water is 19 degrees.