Want this question answered?
Yes. Connect Black to Black, White to White and bare ground wires together.
Just install the new fixture with black to black, white to white, and cap off the ground wire on the new fixture. It'll be fine.
The green wire on the light fixture is a ground wire. If there is no ground wire in the conduit, the green wire should be attached to the metal box with a screw.
The fixture box should have a ground screw on the bottom of the box. Sometimes you have to move other wires out of the way to see it. Just reconnect the fixture ground wire to this screw.
If you mean 2 bare copper wires those are the ground wires. Tie them together and then connect the light fixture ground wire which will be green or bare copper to those ground wires.
Yes
Connect the ground wire to the metal box.
To the black wire on the fixture.
As the power to the light fixture should be, and hopefully is off, it does not matter which you hook up first.
very easy just pull your self a line from the outlet to the location you want to have the pull light fixture installed ,then connect the black wire to the black wire in the outlet white to the white and the copper ground to the ground then on the other end of the wire at the light fixture location connect the black to the copper screw and the white to the silver screw .and that should make it work with pull string .but make sure the circuit is turned off for that outlet location before you do the instillation
Recessed light can be called as down light, pot light (canadian), can light (for canister in American). It is a light fixture that installed in hollow opening in ceiling.
There should be a black & white wire coming from the light. Hook black to black and white to white. Then connect the ground wire to the light chassis. You need 12/2 with ground for the circuit. You do not need a light fixture box for these type lights.