0
The green wire on the light fixture is a ground wire. If there is no ground wire in the conduit, the green wire should be attached to the metal box with a screw.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
I am installing a kitchen light fixture in the ceiling. While pulling down the old fixture the green ground wire broke. The new Fixture has a green ground wire. Where do I ground it to now?
The fixture box should have a ground screw on the bottom of the box. Sometimes you have to move other wires out of the way to see it. Just reconnect the fixture ground wire to this screw.
What color screw does the black wire attach in a porcelain light fixture?
If there is a brass colored screw and a silver colored screw, the BLACK wire will connect to the brass screw. If you can't see a difference, connect the black wire to whichever screw connects to the CENTER contact of the light fixture.
Can you connect a wall switch and a light fixture to an existing light fixture?
If the question is, can I wire a switch to an existing light fixture (and I must assume that it's something like a pull-chain light fixture), the answer is yes.If the question is, "how do I wire a switch to an existing light fixture that has no external switch", the answer is, "in series".The attached web site gives simple instructions on how to wire a basic light switch to an existing light.See sources and related links below
How do you wire a 240 volt light fixture?
Does it have a name plate or instructions on how to wire it? the wire that you pulled black,red or red ,blue goes to one of the fixture leads and the other color to the remaining fixture lead. green to green for your grounding conductor. As always if you are unsure consult a qualified person in order to be safe!
How do you wire a 220 volts light?
The light is wired the same as any voltage fixture. Bring the source voltage to the fixture and connect it to the two fixture wires. If you want to control the off-on of the fixture take the source voltage to a switch first and then out of the switch to the light fixture.
Do light fittings need to be earthed?
Normally the fixtures come with a grounding screw that you attach the grounding wire to. If the box you attaching the fixture to is metal and there is no grounding wire present then the grounded conduit should ground you fixture.
I am installing a kitchen light fixture in the ceiling. While pulling down the old fixture the green ground wire broke. The new Fixture has a green ground wire. Where do I ground it to now?
The fixture box should have a ground screw on the bottom of the box. Sometimes you have to move other wires out of the way to see it. Just reconnect the fixture ground wire to this screw.
What color screw does the black wire attach in a porcelain light fixture?
If there is a brass colored screw and a silver colored screw, the BLACK wire will connect to the brass screw. If you can't see a difference, connect the black wire to whichever screw connects to the CENTER contact of the light fixture.
How to Hang a Ceiling Light Fixture?
How to Hang a Ceiling Light FixtureA new light fixture is a great way to update a room. Follow these steps to remove the old fixture and install the new one safely and properly.Turn of the power at the circuit breaker panel and make sure the light switch is off as well. Remove the light cover and bulb. Use a screwdriver to remove the screws holding the old fixture in place. Ensure the power is off by using a circuit tester. Remove the wire nuts from the black, white and green wires. These are the hot, neutral and ground wires respectively. Untwist the wires and remove the old light fixture. Make a support bracket to hold the new fixture in place from two "S" hooks and some wire. Make a loop at each end of the wire, slip an "S" hook through each loop. Connect one hook to the light support bracket and the other end to the new light fixture. Twist the black wires together, followed by the white wires and then the green ones. Remove the wire support that you made and gently push the wires back inside the fixture's electrical junction box. Use a screwdriver and screws to attach the new fixture to the mounting bracket. Screw in the light bulbs. Compact fluorescent bulbs are an environmentally friendly option. Attach the light cover. Turn on the power and test the light.
Can you connect a wall switch and a light fixture to an existing light fixture?
If the question is, can I wire a switch to an existing light fixture (and I must assume that it's something like a pull-chain light fixture), the answer is yes.If the question is, "how do I wire a switch to an existing light fixture that has no external switch", the answer is, "in series".The attached web site gives simple instructions on how to wire a basic light switch to an existing light.See sources and related links below
What if the light fixture has two copper house wires?
If you mean 2 bare copper wires those are the ground wires. Tie them together and then connect the light fixture ground wire which will be green or bare copper to those ground wires.
How do you wire a 240 volt light fixture?
Does it have a name plate or instructions on how to wire it? the wire that you pulled black,red or red ,blue goes to one of the fixture leads and the other color to the remaining fixture lead. green to green for your grounding conductor. As always if you are unsure consult a qualified person in order to be safe!
How do you wire a 220 volts light?
The light is wired the same as any voltage fixture. Bring the source voltage to the fixture and connect it to the two fixture wires. If you want to control the off-on of the fixture take the source voltage to a switch first and then out of the switch to the light fixture.
How do you attach a three prong plug wire with a green white and black wire to a shop light with a black wire and white wire?
The green wire is for ground. You can attach that to any metal part of the frame. The red is the active and coincides with the lefthand prong into the plug and the black in this case should be the Neutral and ciocides with the right prong into the plug as seen standing behind the plug.
Wiring Up a Light Fixture?
Wiring Up a Light FixtureWhen remodeling a dining room, the light fixture can become a hazard if it is hung low enough. Banging one's head on a chandelier or heavy light cover hurts. If a light bulb breaks, it can become dangerous with broken glass in the eyes and under the feet. Wiring up a low-hanging light fixture takes a attention to a few details.Remove the table and chairs so access to the light fixture chain is unhampered. Set up a stepladder close enough to the fixture that it is easily worked on without the person leaning away from it. If the light covers are in the way, remove them to a safe area. Determine how much to raise the light fixture so people can walk under it safely.For raising the fixture temporarily, use a piece of baling wire or heavy construction wire. Place the wire through two of the chain links and lightly twist with a pair of pliers. When the work is over, remove the wire and lower the light fixture.If permanently raising the fixture is desired, purchase a connector link from the DIY store that matches the light fixture chain. As with the wire, attach the connector to two of the links and leave in place.This can be done with any light fixture in the home, on the patio, entryway or porch. For lights hung with cable, use a hose clamp spray-painted to match the cable. Do not over-tighten.
Where does the switched live go in a ceiling light?
To the black wire on the fixture.
How do you add another porch light to an existing switch?
Piggyback off the box for the existing light. Run a wire from the existing junction box to a new junction box (which is placed wherever you want the new fixture). Then, in the existing box, connect the wire coming from the switch, the wire for the existing fixture, and the wire for the new fixture together using wire nuts. Wire up the new fixture, and presto, you have two fixtures on a switch where there was only one before.
