Open the door you wish to adjust and look at the body part of the car to which where the door latch mechanism attaches. It is a silver slab that has a U shaped piece to it. This is the striker and you must adjust it to allow the door to close flush to the car again.
It will require a torx screwdriver (it looks like a star), and I believe it is size T25. Loosen both torx screws and reposition the striker a bit in, since the door is sticking out and you want to make the door flush. You can try putting on some Loc-Tite that basically hardens the screw into place so you won't have to do this again.
yes the front two doors speakers are 6.5 and the back passenger seat speakers are 5.25 .
how i can open back door passat 1998
It's a sunvisor.
Yes, they do.
5 1/4 for the back doors and 6 1/2 for the front doors. I am not sure about the dash board speakers.
Because the hinges are welded in place, replacing the hinge pins and bushings should restore the door back to original position.
at the bottom of d arm pull off the cap undo d bolt pull out d arm off d teeth n move as many teeth as u need 2 put d bolt back on n cap n jobs a goodn
when looking under the hood from directly in front of the car, it is on your left hand side toward the back. there is a plastic mold over it, but it is right against the firewall on the passenger side.
You can find adjusting screws on the back side of each headlight. The screws are facing the engine and can be accessed only if the hood is open.
4 regular doors and the back opens also.
adjust your crank back a bit
6x5 IN THE FRONT DOORS AND 4x6 IN THE REAR