Power Factor = KVA/KW. This has no unit. Its value is always 1 or less.
The 0.8 Power Factor provided by generator manufacturers is not the load power factor, but it is the nominal power factor used to calculate the kW output of an engine to supply the power for a particular alternator kVA output. Alternators are therefore designed to supply their rated kVA at 0.8 lagging power factor.
LPF is Low power factor, which is used to calculate overall power in VA (voltamps) kind of like calculating overall power in watts.
317.025280 KILOWATTS = 317,025.28 WATTS
we can calculate power consumption of motor by multiplying voltage and current which motor is take.AnswerYou need to know its rated power (i.e. its output power) and its full-load efficiency, from which you can calculate its input power.
Output Power divided by Power Factor.
p.f=kW/kV.A
If a load takes 50 kW at a power factor of 0.5 lagging calculate the apparent power and reactive power Answer: Apparent power = Active power / Power Factor In this case, Active power = 50 kW and power factor = 0.5 So Apparent power = 50/0.5 = 100 KVA
always a live
The 0.8 Power Factor provided by generator manufacturers is not the load power factor, but it is the nominal power factor used to calculate the kW output of an engine to supply the power for a particular alternator kVA output. Alternators are therefore designed to supply their rated kVA at 0.8 lagging power factor.
If you multiply kVA by Power Factor (Ranges from zero to one) you get watts which is effective power.
in case of inductor or capacitor power factor is always zero.as power factor is cosine of phase angle between voltage and current. in case of inductor and capacitor phase angle between voltage and current is 90 so it become zero so if given power factor is zero then it can be inductor or capacitor.
simply by measuring the coil voltage, coil current & power factor.
Rephrase your question so that it makes sense.
LPF is Low power factor, which is used to calculate overall power in VA (voltamps) kind of like calculating overall power in watts.
Amps = Watts / (Volts x Power Factor). The Power Factor is one for resistive loads and decreases for inductive loads like motors.
how can i calculate brsting factor and what may be the bursting factor for corogated pakaging
1 HP is 746 watts in principle. The power is in watts, and the power is the volts times the amps. For an AC motor the power is the volts times the amps times the power factor times a factor that depends on the power-conversion efficiency of the motor.