Output Power divided by Power Factor.
Power limitation transformer circuit structure of power supply, including: an electromagnetic interference filter unit, a rectifying unit, a power factor correction section, a transformer having a primary input terminal and secondary input terminal, a pulse controlling unit connected with the secondary input terminal of the transformer, a primary power limitation circuit and at least one secondary power limitation circuit, an output current controlling unit and an output voltage controlling unit. The input terminal of the output current controlling unit is connected with the secondary output terminal of the transformer. The primary output terminal and secondary output terminal of the output current controlling unit are respectively serially connected with the primary and secondary power limitation circuits. The input terminal of the output voltage controlling unit is connected with the secondary output terminal of the transformer. The output terminal of the output voltage controlling unit is connected with the secondary power limitation circuit for controlling the magnitude of the voltage and current of the primary and secondary power limitation circuits so as to control the output power.
The input voltage (primary) and output (secondary) of a transformer is determined by the manufacturer. Transformers are bought to accommodate the voltage that is needed on the primary side and to what voltage is needed on the secondary side.
here, the power required by the receiver is the output power and that required from the source is input power. Gain in dB=10 log(output power/input power) we have, loss in dB = -gain in dB = 10 log(input power/output power) or, 50 = 10 log(input power/10nW) or, anti-log(5) = input power/10 nW so the power required from the source is antilog(5)*10nW = 1 mW
Efficiency is defined as the ratio between the output power and the input power of a machine, expressed as a per unit or percentage. Power factor improvement has absolutely no effect on the behaviour of a load. All it does is to reduce the magnitude of the load current. A reduction in load current means that less copper can be used in the supply of energy to the load. However, it doesn't effect either the output or input power of the load. So the answer is no, power factor has no effect on the efficiency of a load. You could argue, however, that if improving the power factor of a load reduces the supply current, leading to lower line losses, then there is an improvement in the efficiency of the supply system.
The 0.8 Power Factor provided by generator manufacturers is not the load power factor, but it is the nominal power factor used to calculate the kW output of an engine to supply the power for a particular alternator kVA output. Alternators are therefore designed to supply their rated kVA at 0.8 lagging power factor.
Efficiency = Output/Input. This is usually expressed as a percentage but may be given in the form of a ratio.Another AnswerEfficiency is output power divided by input power, normally expressed as a percentage.
It is ratio of ideal power output upon dummy input. Lesser the fill factor greater will be the efficiency.
You divide useful output energy by the input energy. Or equivalently, useful output power by input power.
UPS is Uninterruptable Power Supply. It is neither input not output. It supplies electrical power to a computer when the main electrical supply is interrupted. It does not handle data in any way.
Output - because it is outputting power to the rest of the device
Power limitation transformer circuit structure of power supply, including: an electromagnetic interference filter unit, a rectifying unit, a power factor correction section, a transformer having a primary input terminal and secondary input terminal, a pulse controlling unit connected with the secondary input terminal of the transformer, a primary power limitation circuit and at least one secondary power limitation circuit, an output current controlling unit and an output voltage controlling unit. The input terminal of the output current controlling unit is connected with the secondary output terminal of the transformer. The primary output terminal and secondary output terminal of the output current controlling unit are respectively serially connected with the primary and secondary power limitation circuits. The input terminal of the output voltage controlling unit is connected with the secondary output terminal of the transformer. The output terminal of the output voltage controlling unit is connected with the secondary power limitation circuit for controlling the magnitude of the voltage and current of the primary and secondary power limitation circuits so as to control the output power.
power in, and power out--input and output.
Efficiency is the common term for any thing. Usually we give input to perform an act and we derive some output because of that. As far as material machines are concerned definitely output power cannot exceed input power due to conservation of energy. Therefore the ratio of the output power to that of input is defined as efficiency of the machine. Usually it will be given in percentage by muliplying the decimal by 100.
input 220v ac & output 24v dc
mu = output power / input power; where mu is the efficiency input power can be calculated from P = IV ; where P is power, I is current, and V is voltage. output power can be calculated from P = Fv ; where P is power, F is applied force, and v is the velocity.
It depends on the required output current, load rejection factor, and ripple. Also, efficiency enters into the picture.
Output power can never be more than input power. With a transformer, it is possible to increase the output current (while decreasing the output voltage), or to decrease the output current (while increasing the output voltage).