On the Walgreens instant ear thermometer. While the thermometer is OFF press and hold for 5 seconds the START button, it will show the ---C on the display, now press and release the start button one time and it will show ---F. Let the display turn off and it should be on Fahrenheit when you turn the thermometer back on. Hope this helps some people out.
(temperature in Celsius) x 9/5 + 32 = Temperature in Fahrenheit
Rough guide:
37C = 98.6F
38C = 100.4F
39C = 102.2F
40C = 104F
Okay, I think this should work to change the settings on the Braun Ear Thermometer.
Turn on the thermometer and hold down the O/mem button. While you're pressing it, press and release the activation button to switch over to the" change temperature" scale mode. When you press it, the "C" should come up on the LCD. When you continue pressing the button, it will go back and forth between F and C. Release the memo button to the ready symbol. The temperature stored in memory will automatically be converted.
most thermometers have two buttons on and the take temperature, while its off hold the take temp. button for 10 to 15 seconds until it starts flashing Celsius or Fahrenheit when this happens use the take temp. button to choose either do not turn off the unit it will take a moment to set when it starts flashing again it is safe to turn off.
1.) Press and hold the button on the top (Power/Scan button)
2.) Without releasing the Power/Scan button, press the blue button on the back (M / Memory button)
3.) Release the memory button
4.) Release the Power / Scan button
The thermometer should now read in Fahrenheit (or Celsius if it was in Fahrenheit mode).
push the button twice, one right after the other and hold the last push for 2 sec. also you can visit BD.com where there are instructional materials. :-)
My thermometer is a safety 1st, and to change the celsius to Fahrenheit you press down both buttons (power and mode) at the same time and it will switch.
Push the large C button.
(x-32)*5/9
While the thermometer is OFF press and hold for 5 seconds the "START" button, it will show the --- °C on the display, now press and release the "START" button one time and it will show --- °F. Let the display turn off and it should be on Fahrenheit when you turn the thermometer back on. Hope this helps some people out.
If thermo doesn't have both scales use chart below
Start with the thermometer in off mode. Hold the smiley face down and wait. The thermometer display will scans through multiple functions. The first display will be C*, you want to continue holding the smiley face until the display shows F*and then let go. This will change the setting from Celsius to Fahrenheit.
For a Meijer K1-8120 from Bestmed. Turn on the thermometer... when display pops up, press the button again. The units should now be in Fahrenheit . Hope this helps.
Hold on/off button and reset simultaneously for 3 secs
Electronic balance
With the unit in the off mode, depress the on/off switch and hold in until the "c" in the display switches to an "f." It will now measure in Fahrenheit.
Leave it off and then hold down start button until c flashes up on the display
Turn on the thermometer and continue holding down the on button for about 10-15 seconds until the "C" turns to an "F" then let go.
Hold the "on/Scan" button for 5 seconds while the thermometer is off. You will see a F when it has changed.
Hold the take temp button for 10 to 15 seconds until you see the F for fahrenheit appear on the screen