You don't you pay the nearest shop $1100.00- $1400.00 to do it for you.
cause you have to have air tools (and know how to use them with out cross threading any thing), an engine hoist and help .
First thing you need to do is, pull the front wheels off. Then you will need to remove the axals out of the transmission. Then you can pull the tranny and get to your clutch.
how to change a spare tire on a hyundai tiburon
It is either worn out , glazed, or there is a fluid leak in the bell-housing , or clutch enclosure.
no but its is with the 2005 -2007
Unbolt the engine lift it up and turn it to the side where u see the tranny, unbolt the transmission, unbolt the pressure plate from the flywheel, take the clutch out, when u put a new one in make sure to use a clutch allingment tool
Dot 3 or Dot 4
at the end of the clutch cable remove nut from the top of that arm pull that arm off.
go to the fuse box and grab a needle nose pliers, change out the fuse that is not working
The 97 Tiburon doesnt have a clutch cable. It is hydrolic. Look on the right hand side of the motor directly on top of the transmission and you will see a cylinder about an inch and a half wide and 4 inches wide bolted down with 2 12mm bolts with a rod coming out of it that connects to a lever on the transmission. This is what controls your clutch!
no tiburon has a dipstick for the tranny fluid. you have to take off the fill plug and check with your finger.
Yes, it does have a hydraulic clutch Yes, it does have a hydraulic clutch
clutch change method Nissan Almera