First off I have to assume the that the engine arrangement is the same for the 2001 as a 1999 model.
1. Remove the air inlet cover that runs over the top of the engine by unclipping at the air filter end and loosening the massive jubilee clip at the other end and sliding it off the rubber retainer.
2. Using a suitable sized Allen key remove the cover on top of the engine block. You should now see the HT leads leading to the sparkplugs.
3. Two of the sparkplugs are accessed by pulling up the plug cover two have covers held by male torx bolts. You will need to uy a special female torx bit for this. Unscrew these and pull up to access spark plugs.
4. Loosen the sparkplugs with a suitable deep socket. I found it easiest to loosen the plugs and extract by pushing the covers over them. The rubber grips the plug and it can be pulled out from the deep recess.
5. replace with new plugs and working in reverse, fit all the bits back that you have removed.
I hope you find this useful.
How i can change the engine oil for my my mercedes benz 240c 2003?
A diagram of how to change and how many spark plugs are on a 2000 Mercedes e320
easy.........take the old spark plugs out and put the new spark plugs back
12
You will need 12 bocsh spark plugs. These engines have 2 spark plugs per cylinder.
actually it is a ml320
The spark plugs on a 1998 Mercedes Benz E320 are changed by removing the cover plate, disconnecting the plug wires, and unscrewing the spark plugs using a deep wall socket. New plugs are then put in place and torque down to specifications.
Of course it has spark plugs. At list it was diesel.
when do you change spark plugs
6 plugs.
The same way you gap spark plugs for any car that uses spark plugs.
It doesn't carry spark plugs but it has 6 spark plugs installed in the engine. The only internal combustion engine that does not have spark plugs is a diesel.