0
To clean, I was told to use Simple Green once a week if not more often since it is very gentle.We have high lime and calcium in our water so this is not a true overall solution for my area. We did this faithfully for the first few months but noticed it peeling up. The company came out and said they fixed it. The problem persisted, more pieces came loose on the bottom of the tub, inside.Our tub was originally white, it was resurfaced by the previous owners to match the toilet which was blue. Found out later that the sink had been resurfaced as well. I wanted the bathroom back to white and we were switching out the toilet and sink with new white fixtures. We opted to resurface because it wouldn't tear up our tile or the Plumbing in this 50 yr old house which is on a slab foundation. I was told to dry the tub out after every use. When I complained to the company that resurfaced ours, they always blamed me for not following directions.They gave me a long list of dont's, I complied.Never leave anything, shampoo bottles, bar of soap, etc on it or the sides. The moisture will collect between the two and pull up the paint.Also do not allow water to drip. All of these things will void the warranty.No Comet or that type of chemical cleaners to be used, they will intefere with the bonding agents.Constant water dripping on the surface will cause peeling, as will the bath mats with the suction cups.If you have an animal to bathe, put a towel on the bottom of the tub to protect it from the nails scratching it. I don't suggest resurfacing tubs because they only last a few months to a few years. Ours has been refinished twice and it is peeling again. It looks like a new tub is the only answer for us. The standard bathtub is not what is in your house. The tubs made now are shallow. Be careful if or when you buy a new one measure yours and measure theirs.If we remove our tub, it will tear up our wall tiles which are in perfect shape, are original and match all of it on the walls around the entire bathroom from 4 feet high to the floor. What do you do? Before they apply this stuff, they have to sand it down to make it porous, so the epoxy will hold. I thought about scraping down our tub back to original white, but the damage was done from the first application of sanding, therefore that was not an option for us. As a few more notes: Make certain to clean your cabinets right away after having this done, the white dust goes everywhere. The people that did ours sealed off the bathroom when they are preparing the surface for the application (sanding). Remember that birds and other animals have to be protected from these fumes, either have a friend keep them or kennel them, they need to be out of the house for several days. I would not suggest this for people with auto immune system or breathing problems. It's really harmful and yes they have their fan blowing out the window (if you have a bathroom window), but some of the fumes still come into your house. Replace, don't resurface, that's my motto, why spend $350++ resurfacing just to have a tub that you cannot use or have to be so careful with. My mom used her tub for everything, cleaning blinds, big blankets, the dog, etc and we never had any trouble like what I have experienced with this tub. I want a normal Tub back in my home! ;)
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
Where can I learn how to resurface my bathtub?
Go to MAB paints and buy the material in pint or quart cans, it is expensive but commercial quality. It is a 2 part epoxy with colorant. You will also need a quart of thinner to suit.
3 Ways You Can Resurface a Bathtub ?
Use a LinerAn easy way for you to resurface your bathtub is for you to purchase a liner for your bathtub. Using liners is an easy process. They are normally just glued into the bathtub. In addition, bathtub liners can last for an extremely long time. The normal lifetime length for bathtub liners is around twenty years. Unfortunately, since they are made from acrylic, they can crack over time. Each liner that you use for your bathtub is designed to match your bathtub's specifications. It normally costs around thirteen hundred dollars for bathtub liners.Use a Bathtub Resurfacing KitYou can purchase a bathtub resurfacing kit that can give you all the supplies that you need in order to resurface your bathtub. Although each bathtub resurfacing kit that you use will be different, all bathtub resurfacing kits feature similar steps and directions. Resurfacing your bathtub with a bathtub resurfacing kit normally involves preparing your bathtub and spraying an acrylic coating on the bathtub surface. In addition, bathtub resurfacing with a kit normally involves the use of primers, cleaners, and fillers. It is extremely important for you to read the instructions of a bathtub resurfacing kit before you try to do this on your own. You can normally purchase a bathtub resurfacing kit for around seventy dollars or more.Hire a ProfessionalEven though there are many cheap ways for you to resurface your bathtub on your own, there may be times when you cannot do it on your own. If this is the case for you, it is possible for you to hire a professional to resurface your bathtub for you. Although hiring a professional is the best way for you to make sure that it is done properly, there is no doubt that hiring a company can get expensive. In fact, it may cost around five hundred dollars for you to hire a professional to resurface your bathtub. It normally takes between one and two days for a professional to finish the bathtub resurfacing process. Hiring a professional could be useful because you may not get the result that you want by doing it on your own.
How do you clean a saxophone in the bathtub?
you don't clean it in the bathtub, that will cause it to rust
Can you resurface an old bathtub?
Yes, but you will need several gallons of tar and to kill a dog as a sacrafice to the tub gods :D
Soak in this to get clean?
Bathtub
Bath & Kitchen Resurface?
form_title=Bath & Kitchen Resurface form_header=6963 Please specify which fixtures or surfaces need resurfacing. (Select all that apply)*= [] Contemporary bathtub [] Bathroom sink [] Antique bathtub [] Kitchen sink [] Shower stall [] Wall tile [] Shower Pan [] Countertop tile [] Kitchen appliance(s) [] Countertop [] Whirlpool tub [] Other What has to be taken care of?*= [] Repair cracks and chips [] Resurface in same color [] Resurface in new color [] Match to other features in room [] Other
What paint is waterproof?
Anything epoxy based, but be aware you will need epoxy thinner for clean up.
How do you clean a chihuahua?
If its calm you can clean it in the bathtub or if it moves lot you can clean it with a hose.
How do you clean epoxy floors?
With the X5 steam cleaner.
What has a ring but no ears?
Your bathtub. Go clean it.
Will turpentine harm a fiberglass bathtub?
Turpentine will not harm a fiberglass bathtub. Small amounts of turpentine can be used to clean stubborn adhesives in the bathtub.
What do you clean epoxy paint with?
Epoxy thinners is the only thing you can use to thin down Epoxy paints however for cleaning other thinners such as general purpose and gunwash should do the job aswell.
