This may be difficult. If the television has video outputs, you can connect these to the projector. Most of the connections found on a tv are inputs, however.
If you TV has output connection, then you can get cables to connect your TV to your projector. For example I have a TV with RCA video and audio outputs, I use 3 RCA cables and then I connect them to my RCA inputs into my projector. My projector has a small speaker, so most of the time I just connect the video cable.
You cannot connect a projector to a TV directly. The connections on the TV for video are inputs, not outputs. You need to connect a source such as a DVD player or cable or satellite receiver to the projector.
Yes a projection TV
If you have a projector TV then it would depend on it's connections. A PS3 will connect with an HDMI to a HDTV projector style TV with a HDMI input with the single cable. If you are not talking about a Projector style TV this may not be possible If your projector has an HDMI input and HDMI passthrough, it would be better to go from the ps3 to the projector and then pass through to the tv.
No, most projectors do not have TV tuners. You will need to connect the antenna to a digital TV tuner, and then connect the tuner to the TV.
is this question a joke? You connect the Yellow red & white to the projector!! and move the sensor bar to the bottom of the projected image just like a TV
Yes you can purchase an HDMI, VGA and composite video adapters to connect an iPad to a projector. You can also use Airplay Mirroring to Mirror the iPad's Image on a TV or projector using AppleTV.
If your surround receiver has 2 HDMI inputs, connect both the PS3 and the Xbox 360 to the receiver with HDMI cables, and then connect the HDMI output of the receiver to the television. Simply connect the PS3 and Xbox 360 to the A/V inputs whether they are HDMI, Component, S video, RCA A/V, ETC. It does not matter if it is 480i 720 or 1080P as long as it is a Projector TV and not just a projector
Connect the VGA monitor out on the PC to the VGA input on the projector. If your projector does not have a VGA or DVI input, the resolution of the projector is probably not high enough to adequately display the screen of a computer.
There is no such adapter. A RF OUT does not give you VIDEO, connect your Video Cable to the VIDEO OUT connector on the TV set.
it has a projector in the back and itis connected to a wire that leads to things that have all the data. that is how the shows project.
You can connect an Xbox 360 to projector by an HDMI cable or VGA.