Change the trailer light bulbs to 24 volts and supply a 24 volt source to power them, in that order.
transformer
All you have to do is change the bulbs to 12 volts and supply the trailer with a 12 volt power source. If you leave the original 24 volt bulb in the trailer they will only glow at 1/2 of their rated wattage.
one thousand milli volt= one volt
If your cart has 4, 12 volt batteries in series to make up the 48 volts, just connect the 12 volt lights across one of the batteries.
3 phase 220 volt submersible motor convert to 440 volt
put double power batteries in
All you have to do is change the bulbs to 12 volts and supply the trailer with a 12 volt power source. If you leave the original 24 volt bulb in the trailer they will only glow at 1/2 of their rated wattage.
one thousand milli volt= one volt
change all the light bulbs to 12v
If your cart has 4, 12 volt batteries in series to make up the 48 volts, just connect the 12 volt lights across one of the batteries.
3 phase 220 volt submersible motor convert to 440 volt
put double power batteries in
A volt is a volt is a volt.
A volt is a volt is a volt.
No conversion needed. These are nominal voltages which range from 110 to 120 volts. It will operate fine on the outlet.
Connect two 12 volt batteries in series and you will have an output of 24 volts.
If it is AC then you don't need a formula, you just need a transformer.
There are several ways to convert a 240 volt input to a 1.5 volt output. If the 240 volt input is alternating current (AC), a simple transformer can reduce the 240 volts to 1.5 volts (AC). A properly configured resistor or impedance coil in series with the input and output would also do the job but a tansformer also serves to isolate the output from the input offering greater protection for the 1.5 volt device. You If 1.5 volts direct current (DC) is required, a rectifier circuit is needed after the 1.5 volt AC output. If the source is 240 volts (DC), A resistance circuit in series can reduce the output voltage. You can also use electronic circuitry to chop of the 1.5 volts.