There are several ways to convert a 240 volt input to a 1.5 volt output.
If the 240 volt input is alternating current (AC), a simple transformer can reduce the 240 volts to 1.5 volts (AC). A properly configured resistor or impedance coil in series with the input and output would also do the job but a tansformer also serves to isolate the output from the input offering greater protection for the 1.5 volt device. You If 1.5 volts direct current (DC) is required, a rectifier circuit is needed after the 1.5 volt AC output. If the source is 240 volts (DC), A resistance circuit in series can reduce the output voltage. You can also use electronic circuitry to chop of the 1.5 volts.
By using a step down transformer.
only way to convert from 3 phase to 240 would be to change the electric motor on the compressor
put double power batteries in
To convert a fraction to percent multiply by 100 % 36/240 × 100% = 15% → 36 is 15% of 240.
If it is AC then you don't need a formula, you just need a transformer.
yes 240volts is 240 volts
To answer this question a current value needs to be given. 125000 is the product of amps times volts. I = W/E = 521 amps. So to bring 240 volts up to 125 KVA you need the circuit load to draw 521 amps.
voltage is the PUSH on electrons seriously 120 volts is the difference of 240...Simply said 240 volts is 2 times as strong as 120 volts.
Amperes when kva is shown. The formula is, Amps = kva x 1000/1.73 x volts.
240 volts maximum.
You can't do that. An L14-30 is a 240/120 outlet and you cannot "make" 240 volts from two separate plugs; you have to have a hard-wired 240-volt source (either another type of outlet or wired directly to 240 volts).
Power (Watts) = Current (Amps) * VoltagePower = 22Amps * 240 VoltsPower = 5,280 Watts5280