0
How do you convert a 12-0-12 volt transformer to 16-0 volts transformer?
ChandruB
You can not convert the transformer without cutting the secondary windings. The secondary winding is a split secondary that is wound that way from the manufacturer. To accomplish what you asked would entail unwinding each side of the 12 volt winding half way. At this point solder a pigtail out to a terminal block. This would be your 6 volt tap. Then the coil would have to be rewound to its original state as before the unwind. This same procedure will then be done to the other side of the secondary. Done as a project, maybe, workable within ones capabilities, no.
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
What is the formula to convert 240 volt to 12 volts?
If it is AC then you don't need a formula, you just need a transformer.
How connect a transformer 380 volt 3 pH to 220 volt mono pH?
any one of the three line to neutral is 220 volts
How do i convert from 380 volts to 220 volts?
If these are the exact voltages that you need you will need an auto transformer to obtain these voltages. If these voltages are nominal voltages and are of a three phase four wire configuration, the 220 voltage can be obtained from the three phase legs to the neutral (ground) connection. The equation to use is 400/1.73 = 231 volts.
Is it safe to run a 220 volt AC to 12 volt DC step down transformer in a 110 volt outlet and will it transform it to 6 volts or will it run at 12 volts?
Since there is an AC to DC converter in there, it's hard to say. If it's a basic transformer to rectifier to capacitor design it will put out 6 volts. If it is a transformer to a voltage regulator it's hard to say what will happen. Certainly the drive voltage to the regularor will be cut in half. It may or may not run, but won't be able to run at 12 volts because there won't be any 12 volts to drive the regulator. (There will only be 6 volts.) If it is a switcher it may work fine or it may do nothing.
7200 volt 25kw transformer how many amps at 240 single phase?
The formula you are looking for is I = W/E. Amps = Watts/Volts.
How do you convert 12 volt trailer lights to 24 volts?
Change the trailer light bulbs to 24 volts and supply a 24 volt source to power them, in that order.
How do you convert 115 volt into 230 volt?
The only way to do that is with a transformer. They make inline transformers that convert 230 to 115 and they simply plug in inline.
What is the formula to convert 240 volt to 12 volts?
If it is AC then you don't need a formula, you just need a transformer.
How to convert 440 VOLTS to 380 VOLTS?
3 phase 220 volt submersible motor convert to 440 volt
How do you convert 230 volts to 12 volt system?
With a Step Down transformer. But you will probably have a hard time finding a 240 volt unit. 120 volts units are readily available. <<>> It depends on how big of a transformer that you are looking for. There are many control transformers in the 50 to 500 VA range that have dual primary and dual secondary. The primary side can be connected to 240 volt or 120 volt and the secondary can be connected for either 12 or 24 volts.
Does a transformer convert the current from 240 volts to 120 volt?
Transformers are rated in KVA or VA (volt-amps). They transform voltages from one value to another. The current in a transformer is inverse to the voltage. This is why transformers are rated in KVA and smaller ones in VA.
Can you convert a 120 volt Yamaha clavinova to 240 volts?
Electronic technician will convert in no time. You need 240v power transformer in place of same wattage 120V. Super easy.
How Convert 9 volt to 230 volt?
Converting 9 volts to 230 volts would require a pretty hardcore step up transformer (Expensive) and you probably wouldn't have enough current to sustain the load.See discussion page for more information.
How can you convert milli volts into volts?
one thousand milli volt= one volt
How do you convert 12 volt to 24 volt?
Use a voltage devider or a transformer.
How to go from 220 volts to 600 volts?
Use a step up 240 to 600 volt transformer.
Can you convert a 277 volt ac unit to 230 volt?
There in no quick and inexpensive way of doing this conversion. A transformer would have to be used and this type of winding is not common. 277 volts is the wye voltage of a three phase 480 volt system.
