any one of the three line to neutral is 220 volts
Use a transformer.
Yes by using a 3-phase transformer. The size depends on how much power has to be converted.
220 volt single phase from 480 volt 3 phase that one wire taken one phase and second wire connected in earth point. we get 220 v The above answer is incorrect, one phase from a three phase 480 volt system will give you 277 volts to ground. You must use a transformer to get the voltage you need.
If these are the exact voltages that you need you will need an auto transformer to obtain these voltages. If these voltages are nominal voltages and are of a three phase four wire configuration, the 220 voltage can be obtained from the three phase legs to the neutral (ground) connection. The equation to use is 400/1.73 = 231 volts.
no , it will burn out
You have to buy a transformer or converter from 220v to 110v.
It's an ac voltage-converting device with an output voltage of 220 v.
Only with a 3 phase transformer.
Use a transformer.
You need a step down voltage transformer that converts 220 volt to 110 volt to use a 110 volt printer with 220 volt. You can get good quality transformers at East West International in Houston, TX. If you order online or over the phone, they can ship it to you in 2-3 business days.
Use a step up 240 to 600 volt transformer.
A step-up transformer would be required to supply 230 volts from a 220 volts source from South Africa.
If you combine two 110 volt power lines it does not give you 220 volts, the voltage will be the same. The only way to turn 110 volts into 220 volts is with a step-up transformer.
you get a transformer...
yes, with a step up transformer, taking your mains upto 220v...
If you want mood lighting just connect it as is, the brightness of the bulbs will be half. If you want full brightness change the bulbs to 120 volt with bulbs of the same wattage as the 220 volt bulbs.
For higher current applications you would need a power transformer, for lower current applications you would need an adapter transformer.