Only with a 3 phase transformer.
let me clear difference between phase voltage and line voltage. phase voltage is measure line to neutral and line voltage is measure line to line.there is correct answer that 380 volt is sum of multiply of square root 3 to phase voltage 220 volt.phase volt line volt220 volt x 1.732 = 381 volt230 volt x 1.732 = 400 volt240 volt x 1.732 = 415 voltM. Asif ALi
20 HP Three phase 360 volt what is the amps
A three phase panel will not give you 110 and 220 volts. A three phase four wire panel will, but not at these voltages. The nearest voltages will be 120 and 208 volts. The 120 volt is the wye voltage of 208 volts. 208/1.73 = 120 volts. A single phase three wire panel will give you 110 and 220 volts.
A #1 copper or 1/0 aluminium conductor will limit the voltage drop to 3% or less when supplying 100 amps for 100 feet on a 240 volt a single phase system.
You need to mention the Load connected to find the current.
Use a transformer.
220 volt single phase from 480 volt 3 phase that one wire taken one phase and second wire connected in earth point. we get 220 v The above answer is incorrect, one phase from a three phase 480 volt system will give you 277 volts to ground. You must use a transformer to get the voltage you need.
let me clear difference between phase voltage and line voltage. phase voltage is measure line to neutral and line voltage is measure line to line.there is correct answer that 380 volt is sum of multiply of square root 3 to phase voltage 220 volt.phase volt line volt220 volt x 1.732 = 381 volt230 volt x 1.732 = 400 volt240 volt x 1.732 = 415 voltM. Asif ALi
You can not change it. 440 volt is by design. However you run it with 220 single phase supply, but it would run far lower power.
No.
any one of the three line to neutral is 220 volts
Yes by using a 3-phase transformer. The size depends on how much power has to be converted.
How I can convert 220 V 3 Phase to 380 V 3 Phase
3 phase 220 volt submersible motor convert to 440 volt
Yes.
You cannot run a three phase motor on single phase power. You'll burn the motor up within minutes. By the way, I've never seen or heard of a 380 volt motor. Do you mean a 480 volt motor? If so, the only way you can power it is with the correct full voltage and a 3 phase power supply.
About 220 volts. They're just different voltage levels. 440 volt services can provide more power than 220 volt services typically.