normally if they go too far the wiper arms has been taken off at some point and not replaced propperly just undo the nut on the wiper arm and adjust them slightly to stop them going beyond the point that they should but if they havnt been removed and they were ok before then the motor or the relay is running on too much.
u go and buy a new pair and replace them with the old
go and buy new ones to put on it?
There may be a way, but my guess is that someone put the wrong size wipers on it. Would a shorter wiper blade eliminate the problem?
Replace the motor.
Too Far to Go was created in 1979.
The ISBN of Too Far to Go is 978-0449240021.
Too Far to Go has 256 pages.
there was a factory recall on one of the wiper motors.
There is a short in the wiring block behind the driver's side front headlight.
The wiper motor has a switch inside of it. When they are turned off and the wipers go to the down position it trips the switch in the motor that tells the computer they are in the down position. If that switch in the motor is faulty, the wipers are repositioning until the switch is tripped to the off position. THE FIX.... Replace the wiper motor.
I Wanna Go Too Far was created on 1995-07-31.
Going Too Far was created in 1987.