How do you get a boilers license in minnesota?
A Master Boiler Operator requires 15 years of experience and must pass a test. See related links for information about Minnesota boiler licensing requirements, forms, test schedules, and instruction manuals.
2 people found this useful
Answer . You could appeal to a judge, but don't count on it.
Depends what state, and sometimes city, you're in. There are presently 11 States that require a state Boiler Operator license, along with a number of municipalities, counties,… etc. If you're in doubt about whether your state or city requires a license, contact the National Board of Boiler and Pressure Vessel Inspectors (614-888-8320) or the state agency that is responsible for inspecting boilers in your state. If you're in Ohio, you can go to www.steamworksllc.com and click on the Resources button, then the Boiler Operator / Stationary Steam Engineer licensing link. There's quite a bit of information there. You can also call the Ohio Division of Industrial Compliance at 614-644-2236 for details.
At the present time Ct does not have a statewide Boiler operator license. Some citys in Ct do require a license . A statewide license is being contemplated for the near future…. The nearest chapter of the "National Association of Power Engineers" NAPE would be able to where you could apply for a boiler operators license or training. Give them a call. Bear
Depends where your from and what the local codes require . One of the best places to start is the NBBI OR AMSE . National board of Boiler Inspectors
To get a boiler license in New York, one has to write to the NewYork State Department of Labor. They will send a boiler supervisorwho will give recommendations if a given cust…omer is supposed toget the boiler license.
There are several ways in which you can get a Minnesota Specialclass boilers license. You can attend a 10 week training courseoffered in various areas of the state and take yo…ur test at yourlocal secretary of state office. You can also attend formaltraining at a college which will take you longer but provide youwith hands on training and take the certification test through theschool.
To obtain a boiler's license a person has to complete training.This training is usually both text and hands on. The hands on partmight be done by working as a boilerman's appr…entice. Then there isa standard test that has to be passed that is given by the state.
To get your boilers license in Nebraska you are required to attendsecondary education. This can be completed through training schoolsor colleges throughout the state. You will… also find severaltraining classes that last approximately 10 to 12 weeks. You musttake your certification test through a Secretary of State office inthe state of Nebraska as well.
To get a boiler operators license in the state of Mississippi youmust first attend a training course provided at a college oraccredited training facility. You must also take a… Boiler Operatorstest at an approved testing site in the state. Often this is yourlocal Secretary of State office.
Contact Minnesota State government (state.mn.us)
I'm currently holding a NJ Blue Seal High Pressure Engineers License, and trying to get the NYC high pressure license:. First Stop at: DCAS 1 Centre Street 14th floor for the… exam schedule, and requirements.. I'm reading, and re-reading the qualifications, and i need to only take the NYC Stationary Engineer's exam administered only once a year!!
No you can't. And you can't drive out of state either because regristration and driver's licenses all work the same way, so if your not valid to drive in Minnesota, you can't …drive in any other state either.
i thought u might have the answer considering ur name
state dont need one . in ny city you do and some other citys
In Ohio, there is a practical experience requirement before a person can sit for the High Pressure Boiler Operator exam, but if you complete a state-approved training program …you can cut the required practical experience down. You'll either need to have 2000 hours of first-hand practical experience dealing with steam boilers and associated equipment, or if you complete a state-approved training course of at least 75 hours, you can cut the practical experience requirement to 1000 hours. The High Pressure Boiler Operator level of license allows you to operate any steam boiler that falls under State of Ohio jurisdiction. (For example, boilers in federal prisons or nuclear power plants do not require an Ohio license because they fall under federal jurisdiction).. If you want to sit for the Low Pressure Boiler Operator exam (which allows you to operate boilers with a maximum pressure of 15 psi or less), you have to have 2000 hours of practical experience, or if you complete a state-approved training program of at least 50 hours you can cut the practical experience requirement to 600 hours. This level of license is most often carried by custodians in school systems who operate low pressure steam heating boilers.. Note that you can also obtain a Stationary Steam Engineer license in Ohio. This level of license is a step above the High Pressure Boiler Operator license. It allows you to operate steam turbines as well as high pressure or low pressure steam boilers. To qualify to sit for this exam, you'll need to have 2000 hours' practical experience working with steam boilers and/or steam turbines. Or, if you complete a state-approved training program of at least 125 hours, you can cut the practical experience requirement to 1000 hours.. Most people obtain the practical experience in one of the following ways: (a) An employer brings the employee into the department where the license is required, and the employee "learns the ropes" from other employees and supervisors during a training period. Then the employee goes and takes the exam. (b) The person who wishes to obtain the license works in a facility that uses boilers which are small enough that an operating license is not required (fewer than 360 square feet of heating surface) to obtain the required experience. Though these smaller boilers do not require an operating license, the time accrued working with them counts toward the license exam requirement. (c) Sometimes a person volunteers time at a facility that will allow him/her to spend time learning the equipment on their own time.. Alternately, you may satisfy the experience requirement if you were a Boiler Technician or Machinist's Mate in the US Navy. You'd need to provide a notarized copy of your DD-214 form showing that classification. That experience must be within the last 5 years.. If you go to www.steamworksllc.com you can find lots of information about the Ohio requirements there. Click on the "Resources" button and then on the "Boiler Operator / Stationary Steam Engineer Licensing" link. There you can find several links to Ohio's Licensing Laws and Rules (a downloadable PDF document), the exam dates and location, fees, the exam application form, contact phone numbers at the State of Ohio, etc.. Hope this helps!
Bates College in Tacoma seems to offer a class for it: http://www.bates.ctc.edu/page.asp?view=160
NO. You need to have 5 Years of sit time in NYC to be eligible to take the exam. 1 year with a mechanical engineer degree and 1 year if you have at least 4 years of sit time w…ith a blue seal.