if you want to fromat a hard drive for windowsXP then read this...
/a<
you will need your winXP cd
This a fast trick to get you computer in DOS mode. Power off your computer then power it back on, while your computer is turning on keep pressing F8 repeatedly until you computer prompts you how you want to run. Some of your options will be run in safe mode, run in safe mode with networking, but you will select run in DOS mode. Once your in your DOS mode then you are ready to go!
when in dos, type command:
x:\>format x:
x = drive letter (this is usually "c")
to delete a hard drive boot with a bootable floppy or a win 98 setup disc and write a command format c it wil format then copy the system files and install the windows again.
You use the command
FORMAT [driveletter:]
where driveletter is the letter of the drive you want to format (usually A: for a floppy or C: for the hard drive).
Use the FORMAT command (enter FORMAT /? for syntax & options).
There is no "DOS mode" for a hard drive, and it is not necessary to use DOS to format a hard drive. Vista's installer had a built-in partitioner and formatter.
you can format your drive from DOS, but once you do that you wont have an operating system and your computer will be useless.
If MS-DOS is installed and booted from the drive, it can be accessed immediately at the command prompt. If you have booted from an MS-DOS floppy, you can access the hard drive by typing C:
You have to format your hard drive(s). For that you can use DOS, windows rescue disks, Linux rescue disk (it supports Microsoft formatting).
format /s c: should do the job.
no you dont
your hard drive is most likely not formatted. read owners manual on how to format the hard drive. you will lose eerything on the hard drive when you format it.
If you want to format a hard drive where Os was installed there is no way how you can do. It's actually impossible.
When you format a hard-drive, you will lose any information on that drive.
no
If you have a PC running Windows XP or 98 have a look at the following link: http://www.bootdisk.com/pendrive.htm I have had sucess with method 2 and 4. If you need to format the USB flash drive from a PC running DOS I can not help.
If you format a hard drive that contains Windows, it will be removed. Formatting a drive gets rid of all of the information on it. However, you can right-click your C:/ drive and click format, but it will not allow you if your current OS is running on that drive.