Connect a coaxial cable to the "out to TV" input on the back of your DVR, and then hook up the other end to your TV's "RF In" input. For slightly better picture quality, you can connect composite or S-Video cables from the back of your DVR to the DVD VCR Combo. Newer models have two audio and video connections. Hope this helps and good luck!
Older models may be able to use a coax cable. Newer models require rca connections.
Any DVD/VCR combo with a composite out will work great with your TWC DVR.
The Lorex will connect to your security DVR system, and will be a good choice for making backups.
If the operating system is compatible you will be able to connect the Touchsmart to a HD DVR unit.
SCSI or HDMI cables are used for connecting your DVR.
Only TiVO brand DVR's are capable of that feature at this point in time. Hope this helps!
You can connect the output of your DVR in a DVD recorder, such as the Samsung DVD-VR375. This will record your DVR programs directly to DVD.
The Humax DRT800 DVD-R/RW Recorder/TiVo Series2 DVR Combo, which you can buy for about $140, is a DVD/Tivo combo unit. anonymous@oola.com
Yes, simply connect it to the "off air ANT." cax input on the back of your DVR unit. Hope this helps.
Generally, you can't connect the output of a games console to a cable or satellite DVR. The DVRs normally don't have a video input and are built to record content only from the the broadcaster.
You cannot connect a DVR directly to the camera. You have to use a computer connected to the camera. And Configure the camera in the way it saves all data on the computer hard drive. After that you will have to configure the computer to save the data to the DVR after certain period of time.
DVR cards are created espcecially to monitor CCTV security. It is part of computer component. The DVR card goes to the computer system and then it is possible to connect many cameras.
First, connect the Macintosh computer to an available WIRED Ethernet jack. Then, connect your Directv HD DVR to an available Ethernet jack near it. Then go into the Directv menu, select Setup, then network. Go to advanced set up. Key in you IP Address info and click continue or connect now. Your HD DVR and mac are now sharing files with each other.