First remove battery cable. Remove drive belt with (13mm) or (15mm) I cant remember which wrench on belt tentioner,pulling towards front of car. Then 15mm bolt on the bottom of altenator. Then 15mm long bolt between chain housing and plastic intake. Then a few inches to the right just loosen the 3rd bolt. Its a tight squeeze, but work it out so you can unplug it and remove the 13mm nut on the back.(that wire goes to the battery)
Remove the belt from your 2002 Chevy Cavalier alternator. Remove the wiring harness from the back of the alternator. Remove the alternator retaining bolts. Reverse the process to install your new alternator.
Where is the stater located on a Chevy Cavalier located?
...With great difficulty!!
How do you remove and replace wiper switch on 2002 Chevy Cavalier
The PCV valve on a 2002 Chevy Cavalier is located on the back of the valve cover. It is a plug in type.
Remove the inside door panel of your 2002 Chevy Cavalier. Remove the window motor wiring harness. Remove the window motor linkage. Remove the window motor retaining bolts. Reverse the process to install the new window motor.
where is the location of tensioner of 2002 3.1 L Chevy Malibu to adjust if replacing the alternator?
190F
Begin by removing the wiring from the 2002 Chevy Cavalier neutral safety switch. Remove the neutral safety switch retaining screws. Reverse the process to install your new neutral safety switch.
An alternator from a 2000 Chevy blazer will fit a 2002 S10 blazer with a little fabrication.
There were many different "Chevy" models in 2002. State the model to get a decent answer.
with tools.