take your gages and put them on the beginning of the evaporator (afte metering device or txv) and look at saturation temp then get your temp at the suction line (before the compressor) then take you first temp and your second temp and subtract you highest temp from you lowest temp and that would be your superheat
Superheat is measured by calculating the temperature of the refrigerant vapor above its saturation temperature at a given pressure. This is done using a pressure-temperature chart for the specific refrigerant being used. The difference between the actual vapor temperature and the saturation temperature at that pressure is the superheat.
Superheat was created on 2000-01-25.
add
Undercharge can cause HIGH superheat. Overcharge can cause LOW superheat. You need some superheat when charged correctly. How much is needed is depending on outdoor air temperature and indoor wet-bulb temperature.
Charles Mesure's birth name is Charles William David Mesure.
mesure on your electronical balance
Charles Mesure is 6' 2".
excess superheat in a capillary tube systems means that there is ______ charge
We require to superheat the refrigerant to ensure that no liquid enters in the compressor.So in most of the cases degree of superheat is kept 2 to 3 deg c
Charles Mesure was born on August 12, 1970.
Charles Mesure was born on August 12, 1970.
Sylvie Mesure has written: 'Alter ego'
The right temperature to superheat and sub cool a substance varies greatly. Water for example takes temperatures above 212 degrees to superheat and temperatures below 32 degrees to sub cool.