How do you modify a Nerf Maverick?

Answer 1

- Remove the three screws that hold together the slide.

- Remove the six screws that hold together the body shell.

- Carefull pry apart the slide. There are two small pieces that will fall out: the orange N-strike attachment clip, and a metal pin. Don't lose them.

- Now pry apart the body shell, with the gun handle towards you and on your left. All the little loose pieces will be in this side.

-unscrew the plunger head and replace it with an ace #49 spring put the plunger head back on and put the gun backe to get her need more mods go to nerfhaven.com

Answer 2

Do you mean a modification to make it shoot farther? If so, then open it up (being VERY careful with the cocker) and take out the barrel. There will be three screws at either end of the barrel; remove them. Unscrew the hex socket on the rear-facing end of the barrel. Carefully pull apart the three pieces of the barrel. You will see sticks--one for each chamber. Pull out the sticks and the spring behind each of them. The sticks will be attached to disks. Using a pair of wire cutters, snip the sticks off the disks, being careful not to damage them. Remove the three pronged things. Put the disks back in, screw the gun back together, and go shoot your buddies.