Remove the wheel, remove the brake caliper and the caliper adapter bracket, pull the rotor off of the wheel studs.
chanching rotors on a pacifica is simple pull out the cotter pin in the middle and the rotor should come right off
Had the same problem on another vehicle. Be sure the vehicle is properly secured (using blocks or stops) & will not roll before you do this, but try releasing the parking brake. I don't have much experience working with cars so I had to learn that one by experience.
2005 Toyota tacoma how to remove the brake rotor
Remove the tire and wheel from your 1995 Chevy. Remove the brake assembly. Tap on the brake rotor with a mallet or hammer. The brake rotor will slide off.
If it is similar to other Chrysler products, remove rear wheels, remove caliper mounting bolts, slwide caliper off rotor, remove rotor. Inside rotor should be a small set of brake shoes with adjusting wheel. Adjust in small increments and do both wheels equally.
Remove the brake caliper and hang it out of the way, then thread 2 8 mm bolts into the holes provided on the disk. Screw them in and the brake rotor will come off.
Should be the "peel off" type Remove wheel Remove caliper mounting bolts Slide caliper off rotor Rotor should slide off hub assembly
You remove the brake caliper frame and rotor is then loose.
Remove the wheel and tire assembly and the brake caliper then the brake rotor will slide right off.
Remove the tire and wheel from your 1995 Chevrolet K 3500. Remove the front brake assembly. Tap on the brake rotor with a hammer or mallet until it becomes loose. Slide the brake rotor off.
How do you remove the rear brake rotor on a 2005 Dodge Ram 2500?
Remove the tire and wheel. Remove the brake pad springs and hardware. Remove the brake rotor. Reverse the process to install the new brake and rotor.