By locating and loosening the 'tensioner' for that belt, if the alternator mount does not include a tensioner.
Remove the belt from the alternator. The belt can be removed by loosening the belt tensioner. Remove the wiring harness from the alternator. Remove the cables from the alternator. Remove the retaining bolts. Reverse the process to install the new alternator.
BeltsYes, you must remove all of the belts to replace the alternator belt. The compressor belt first, then the power steering belt then the alternator belt.
Remove serpentine belt, remove three bolts ,an 2 wires. The alternator will pull up off the motor to remove. Put new alternator in replace bolts, replace wires, an replace the serpentine belt..
disconnect the battery. Remove the alternator belt then disconnect the wires. Unbolt the alternator and remove. Bolt the new alternator in then connect the wires, belt, and battery.
Remove the power steering belt first then the alternator belt will go on.
Loosen the alternator belt with the tensioner pulley. Remove the alternator belt. Remove the wiring harness. Remove the alternator retaining bolts. Reverse the process to install the new alternator.
Remove serpentine belt. Remove alternator. The bolts that hold the tensioner on are under the alternator.
Disconnect the 1990 Regal battery. Remove the alternator belt. Unhook the wiring from the alternator then unbolt it. Remove and replace the alternator then reconnect the wiring, belt, and reconnect the battery to finish the installation.
Disconnect the battery, remove all wires from the alternator, slacken the belt tensioner, slip the belt off of the alternator pulley, unbolt the alternator, and remove the alternator. Installation is the opposite of removal.
Loosen alternator remove old belt. Reroute new belt, tighten alternator.
on yours, you will have to remove the bottom shield and work from the bottom of truck.Remove wires from alternator,remove pivotalbolts and remove alternator and replace and tighten belt back.
Wilson the tensioner pulley and remove the alternator belt. Remove the wiring to the alternator. Remove the alternator retaining bolts. Remove the alternator and replace with a new alternator.