To remove the tail light fixture on a 1987 to 1990 Chevy Celebrity sedan:
1. Inside the trunk next to the quarter panel are 3 nuts. Remove the center nut, it should line up with the center of the tail light fixture.
2. Pull back on the tail light fixture until the stud clears the body.
3. Pull outward on the tail light fixture to remove a tab from the back up light panel.
4. Twist the appropriate socket counter clockwise and remove it. You can now replace the light bulb.
Reverse the process to put the tail light fixture back in place.
You have to remove the instrument cluster to service the light bulbs.
Open trunk and remove panel at rear, remove butterfly bolt and tail light assembly should pop out for accessibility to bulbs
You need to be more specific. What year is your Chevy Celebrity and is it on the front or rear of the car?
To replace the dome light gently squeeze the lens to release the clips and remove. Next release the bulb from its mount. Install the new bulb and replace the lens.
To replace the dome light bulb first remove the lens. If you gently squeeze the sides of the lens it will come out. Remove the old bulb, put in the new bulb. The lens snaps back in place.
To change a tail light on a 1988 Celebrity: Open the trunk. Look on the back of the side light you want to change. There will be several 10 mm nuts. Remove the nut in the center of the tail light lens. It is usually silver. The lens will then pull out a bit, then there is a tab into the backup light, pull the lens out of that. You can then remove the light socket and replace the bulb.
Remove tail light housing. Remove lamp. Replace lamp. Replace tail light housing.
The tail light lens on a 1989 Chevy Celebrity is part of the tail light fixture and cannot be conveniently removed. If you want to change a light bulb you have to remove the tail light fixture from the car. To remove the tail light fixture: 1. In the trunk next to the quarter panel are three nuts, remove the center nut. It should be in the center of the tail light fixture. 2. Pull the tail light fixture so that the stud comes out of the body, then pull outward to pull the tab out of the backup light fixture. 3. You can now take the appropriate socket out and replace the bulb. Reverse the steps to replace the light fixture.
You can replace the dome light bulb in a 2002 Chevy Cavalier by first prying the dome light cover off of the light. Then, remove the bulb and replace it by twisting the bulb from the socket.
To change the dash light bulbs you must remove the instrument panel.
Remove the headlight assembly and you will have access to the parking light bulb.
Under the dashboard on the drivers side, in the fuse block. Just pull it and replace it.