0
Note:It may be necessary to remove the exhaust pipe(s) or frame crossmember to gain access to the starter.In extreme cases it may be necessary to unbolt the mounts and raise the engine slightly to get starter out
- Disconnect the negative battery cable.If the vehicle is equipped with a delco loc 2 or theftlock audio system make sure to have the activation code before disconnecting the battery.
- Raise the front of the car and support it securely on jackstands.Apply the parking brake and block the rear wheels.
- On 2.2L engines with manual transaxle remove the brace between the engine and the transaxle.On 2.3L and 2.4L OHC engines remove the air intake ducts to gain access to the top starter motor bolt locatedon the transaxle
- Remove the mounting bolts and detach the starter.Note the location of the spacer shims they must be reinstalled in the same position (if used)
- Working under the car clearly label then disconnect the wires from the terminals on the starter motor and solenoid
Wiki User
∙ 12y ago
Add your answer:
Earn +20 pts
Is it possible to remove the theft system on a 96 cavalier?
no
How do you remove starter for 96 ton?
You can't
How do you you replace a starter on a 96 Geo Metro?
Remove the cables from the starter. Remove the three retaining bolts from the starter. The starter will come out. Reverse the process to install the new starter.
How do you change the starter on a 96 Oldsmobile aurora?
Remove the intake manifold. The starter is underneath.
How do you know if the starter on your 96 Chevy cavalier is faulty?
If you are 100% sure the battery and ignition switch are good and it still will not turn over, suspect the starter or starter solenoid. If you hear it click it is getting power. The only 100% sure way is to remove it and have it bench tested at an Auto Parts Store.
How can you find out what other Chevy Cavalier model years engine will be an exact fit for a 1998 Cavalier Z24 2.4 L4 DOHC engine with a 5 speed?
i cna tell you 97 98 acheva 96-99 cavalier 96-99 sunfire 96-98 grand am it has to br a 2.4 engine tho because the starter is in a different place
How do you replace a starter on a 96 buick lesabre?
Disconnect the negative battery terminal. Disconnect the wires on the back of the starter and remove the bolts holding the starter to the bell housing. Remove the old starter and reverse the procedure for installing the new one.
Where can you find instructions for the installation of the starter and solenoid on a Cavalier?
Somewhat easy to do. You can see it from the top of the engine. You'll have to get at it from underneath. A few bolts, a few elect. connections. Make sure you disconnect the batt first! To remove starter on a 96 Cavalier with a 2.4L engine 1.Disconnect battery 2.Disconnect air inlet duct from throttle body. 3.Remove top starter bolt. 4.Raise and safely support car. 5.From under the car remove second starter bolt. 6.Remove the wiring from the solenoid. To install starter 1. Connect wiring to solenoid 2. Put starter in position and put the 1st bolt in from top of engine and tighten 3. Put starter bolt in the 2nd bolt and tighten. 4.Connect air inlet duct. Connect battery
Will a 96 2200 cavalier motor fit in a 00 2.2 cavalier?
no
Where is the radiator drain cock on a 96 Cavalier Z24?
If it is not on the bottom of the radiator, then just remove the lower radiator hose to drain the system.
How do you take apart a 96 cavalier dashboard?
The 1999 Chevrolet Cavalier dashboard is held on with retaining clips. There are 12 retaining clips. Pry up on each retaining clip to remove the dashboard.
Where is the temperature sending unit on a 96 cavalier?
The temperature sending unit on a 96 cavalier is on the front of the engine. It is just to the left of the alternator.
