Hi,
That's an easy one. Just open the hood, remove the three wing nuts that hold both the turn signal and headlight assembly to the body. Then remove the turn signal assembly first (pull it straight out), and then lift up and pull out the headlight assembly.
I have included a link that shows an actual picture of this area, to make it easier.
Good Luck, Greg
u cant
problem with dome light sometimes working when door is open and some time it does not .i would like to know where the doom light moduel is located
Replace brake light switch.
Have you checked the bulb?
the switch is located at the top back of brake pedal!!
I'm told there is a sensor attached to the oil pan that could have gone bad.
Remove screws, remove light assembly, rotate bulb holder counterclockwise & pull out, replace bulb(# 194). Installation is reverse.....
Your back light switch is stuck or out of adjustment. In most cases it will be located some where along the shifting linkage.
The light is on to tell you to go get to codes scanned. (A more detailed description is available in your Owners Manual.) Many auto parts stores will scan codes for free.
To change the dash light bulbs you must remove the instrument panel.
As per the instructions on page 5-55 of your "Owner's Manual"...
Remove the head light cover plate, then remove head light braket, once you have done that pull the light out and un-plug it.