The GEM is bolted to the back of the fuse box.
REMOVAL:
Disconnect the battery ground cable. CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
Remove the steering column opening cover.
Remove the bulkhead electrical connectors from the (B) instrument panel fuse junction panel.
Remove the instrument panel fuse junction panel bolts and remove the interior fuse junction panel nuts.
Disconnect the GEM electrical connectors from the GEM.
Remove the screws and the GEM.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
Hope this helps,
Where is the airbag module on the 2000. Ford expedition
Check out the guide to replace the side mirror on a 2001 Ford Expedition http://www.techwarelabs.com/articles/other/Ford_Expedition_Side_Mirror_Replacement/index.shtml
I'm not a mechanic / technician but you would also have to change the transmission , the Powertrain Control Module ( PCM ) , and I don't know if the exhaust system is the same if you wanted to replace a 4.6 with a 5.4 in a 2001 Ford Expedition
Remove the tail light housing and replace the bulbs.
Speed sensor on a 2001 ford expedition
The 2001 Ford Expedition has 16 valves.
r134a for a 2001 Ford Expedition
The 2001 Ford Expedition has a V8 engine.
The rap module is located on the fire wall behind the radio of the 2000 Ford Expedition. Rap module stands for remote anti-theft personality module.
The rap module is located on the fire wall behind the radio of the 2000 Ford Expedition. Rap module stands for remote anti-theft personality module.
The 2001 Ford Expedition has a 4-speed automatic.
The 2001 Ford Expedition is a gas-powered vehicle.