Open back hatch and near the tail light inside the frame by rubber gasket you will see 2 screws. remove screws and the light fixture will come out. Just twist the bulb socket and replace bulb
The brake light switch is above the pedal.
The lens is held on with two t25 screws. Remove them, pull lens of, reverse to install.
You can not, you will have to replace the entire tail light.
brake light switch is mounted by the brake pedel remove lower panel above brake pedel and then you will see the switch should be able to turn the switch to replace
Red brake light most likely on due to brake fluid level/sensor issue or parking brake on/wiring issue
In the top of the trunk near where the brake light is located, there is a small plastic window, remove it and you access the light bulb.
Bulb is probably defective. Replace it.
Van is not specific enough...town and country? aspen? Please resubmit your question with make, MODEL and year of vehicle.
Brake light, on your 2000 Chrysler Concorde, by accessing it from the inside of the trunk. Take hold of the brake light, push in and turn. The brake light will come out.
No, it is a brake light.
Which model of chrysler van? Resubmit the question with make, MODEL and year.
On the bracket the brake pedal mounts to.