Most cars and trucks today have what is called a serpentine belt which runs most accessories.They are very dependable and usually easy to replace. To decide if your belt needs replacing, simply look at the grooved side of the belt to see if it is cracking badly. A couple of cracks every 3 inches is normal, but if you see cracks every 1-2 inches I would recommend that you replace it.
On most cars and trucks the procedure is basically the same. First off, get the correct belt by bringing your car's VIN number to the parts store (The VIN is often located on your car's dashboard) because the parts store may need it.
If there are two choices, get them both so you can complete the repair. Once you have the correct belt, take a minute to review how the belt runs across the pulleys and also check to see if your car/ truck has a underhood diagram of belt routing in case you need it. In most cases you will need a socket wrench or breaker bar with either a 3/8" and /or 1/2" head on it and possibly a short extension. Some models may require a wrench of these similar sizes.
Now that you are ready to go to work, you will need to find the spring loaded tensioner which is generally located near the top of the belt path; it usually has a shiny pulley on it. Look at the tensioner and insert the tool into it and apply opposing pressure to release the belt.
Now, simply install the new belt making sure it fits into the grooves on all the pulleys. Start the car to check it and you are done. You also saved yourself some money!
See the answer for "How do you replace the drive belt in a 2000 Ford Focus?". The procedure is the same.
remove the old belt and remove your trouser's belt off and put into the fan
No.
It doesn't have a fan belt. It is transverse mounted and utilizes electric radiator fans.
its simple on the v8 loosen the tensioner and pull off the belt.. to replace if you dont have a belt routing diagram buy your belt from a napa store and they should be able to give you a diagram
The diagram should be unger the hood, over your head or on the fan housing/radiator shroud.
There is no fan belt on a Mazda Miata.
There is no fan belt on a Miata, it is cooled by electric fans.
there is no fan belt. the fan is electric-motor powered.
There is no fan belt in a 95 Camry
It cost nothing. There is no fan belt.
your fan belt may be connected to your alternator if so loosen alternator romove belt put new one on and pull alternator back until proper tension is aqquired tighten