there are 2 torx screws where the headlight housing is mounted to the radiator support. Remove these first. They are 4 to 5 inches long so they have to be pulled after unscrewing them. Remove the housing assembly. Then unplug the wiring, turn the light and remove it from the housing. Install in reverse order. Make sure the aligning stud is inserted into the fender.
You take it to a shop.
It does not have a cabin filter from the factory.
A 2000 Chrysler Cirrus does not have a cabin filter.
You have to remove the upper intake manifold.
No. A 2000 Chrysler does not have a reset.
If it is like my 2000 Cirrus, I use the key to pop the cover off, then just remove and replace.
was wondering if someone can tell me how in detail to remove the tranny from my 1997 chrysler cirrus i need to replace the torque converter seal
Are you sure you mean 2002 Chrysler Cirrus -- they quit making the Cirrus in 2000. It is now a Sebring
YesYes
You have to remove the upper intake.
no it's located in the tank
It is inside the distributor. You have to replace the distributor to service the cam sensor.