Remove the door speaker cover. The cover is held in place with two retaining screws. Remove the speaker retaining screws. Remove the wiring harness from the back of the speaker. Reverse the process to install the new speaker.
6x8
Pull the inner door panels off and the speakers are mounted in the door.
unscrew speakers cut of connector connect wires to speakers screw speakers in replace cover done
five, one in each door and a sub in the rear.
According to our database, here are the speakers types that go in your LINCOLN NAVIGATOR 2001 car, along with their location:Front: 6" x 8"Rear: 6" x 8"Front door: 6" x 8"Back door: 6" x 8"
I have a chevy 2001 ls tahoe. How do you access the drivers side door speaker to change step by step.
The door speakers are 5.25 inches but you have to purchase an insert in order to replace the door speakers.
link here: http://www.craigcentral.com/durango/speakers.asp
You have to remove the door panels. You can use 6.5" speakers with a little bit of adaptation. You can search for door panel removal. There are 4 screws, a couple of clips and clips around the edge of the door panel.
6.5 or 6 1/2 in front and 6 x 9 speakers in back.
Remove door panels.. Unscrew old speakers..Screw in new speakers..replace door panels...ready 2 GO..
assuming you plan to change the speakers on the frond doors, remove the bottom screws on the door frame (they should be facing up), then remove the bottom half of the door panel. Unscrew the stock speakers and replace them with new ones. Then put the door frame back on the door.