I am not a mechanic but, this was an easy fix. There are 4 bolts that you'll remove, 2 that hold the caliper and 2 that hold the hydraulic system. Loosen all 4 bolts and remove. The caliper will be released and you simply remove 2 spring clips and remove the old pads. Use a C clamp to comnpress the brake hydraulic piston. Then reverse the the removal procedure and there you are. It's a very simple deal. Of all the brakes I've replaced this was fairlly painless.
i need a diagram to show me how to remove a starter on millenia s 1999 mazda
The 1999 Mazda Millenia OBD 2 port is on lower right corner of dash; next to tunnel
on a 2.3, it is behind the radio, and is not easy to remove
Should be a 15" wheel. My 96 was.
Your dashboard lights suddenly not working is almost always your indication that your taillights are out. If the fuse for your taillights is blown and you replace it, your dash lights should be fine.
2.5L V-6 Mazda Millenia engine is a non-interference engine. If your timing belt pops, you will not damage your valves, like I did in my Diamante
It is in the Trunk up by the back seat
call your local dealer
take it to a shop its behind the timing belt cover you have to take every thing off the front of the engine including the motor mount!!!
Possibly a vacuum line came undone
how do replace the thermostat on a 1999 mazda b2500 truck?
Well if it's supercharged, its the 2.3L. If it's the non-supercharged, then its the 2.5L.