The staitionary rear window is not a easy repair! You need to remove all broken shards of glass. This info is with the thought that your glass is broke...... The glass is retained with a "adhesive" called urethane. Very strong and hard to remove. You will need to remove all glass pieces and 95% of old adhesive. The sealing surface needs to be 100% grease free. Go to your local parts store and buy a tube of urethane sealer and a can of primer cleaner. I can not remember the part number for the urethane, but the # of the primer is a 3m product,08681. This is a 3m number,I would use nothing else. Follow the prep instructions on the label. Also pay close attension to time. The primer and urethane have a working time limit. Make sure the glue surface is clean,clean,clean.
how to change the rear sidelight on a Lexus 350
The PCV valve on a 2002 Lexus RX300 is located on the passenger side of the car underneath the hood. The valve will be on the rear valve cover.
Passenger side of engine on the rear valve cover.
Passenger Side, top of rear valve cover
pry it off with a rusty butter knife
no
One or more of the brake lights or tail lights are burnt out.
To replace the Ford Explorer rear window hinge, you have to buy a similar window hinge. Use a screwdriver to open the hinge and replace the hinge but fitting it in the window.
Check out this diagram, should be all you need! http://img125.imageshack.us/img125/7711/bodywt1.jpg
How to remove 2000 ford ranger rear window. Need to replace would like to replace with a sliding window need instructions how to do it
It is easy to replace the window regulator or window clips on the rear window of a 2000 Grand Am. The clips simply snap right onto the rails inside that door that connect to the window.
all the slinding rear windows that i put in you had to replace the whole rear glass