0
Ford Galaxy infrared keyfob reprogram (pre 97)
1. hold the remote control in the direction of the vehicle
2. press the unlocking button 3 times within 5 seconds. the control light on the drivers door will iluminate for 20 seconds.
3. within this period press and hold the unlocking button 3 times, if the control light in the drivers door flashes, then the system has accepted the remote.
4. wait until the control light illuminates continuously again and repeat the procedure with further keys within 20 seconds respectively.
Ford Galaxy RF Transmit keyfob reprogram (post 97)
1. insert key into drivers door lock (or passenger).
2. turn the key to unlock position 3 times in succesion, for atleast 0.5 secounds a turn and within aperiod of five secounds.
...the system shouid enter the programming mode now, the led in the drivers door should "iluminate" continusly for the next 15 secs,
the first key must be programed within this period.
3. aim the 1st key to be programmed at the receiver, so therefore aim at the rear view mirror,
press one of the buttons whilst simutaniously pressing the 2nd button 3 times,
release both buttons -then the remote should flash 5 times.
The door led will stay lit for 20 seconds, if you only have 1 key to reprogram, wait until it goes out,
if you have more keys to reprogram do it while the led is still lit.
HOW DO I KNOW WHICH SYSTEM I HAVE ?
infrared remote locking systems have two little dome recievers inside the car,
one near the rear view mirror and one in the rear above the tailgate.
if you dont have these domes, then you will have the RF remote locking system
---- Get Hotmail on your mobile from Vodafone Try it Now!
Wiki User
∙ 15y ago
Add your answer:
Earn +20 pts
How do you reset central locking on Renault megane scenic 2000 model?
how do you reset code for remote central locking on renault megane scenic v reg
How do you reset the central locking on a R-reg Megane As you have installed new batteries in a spare key fob?
Sit in the car with the doors closed and the key in your hand. Press the interior central locking button and hold it in until the doors lock and then unlock, you the have 10 seconds to press the plip button on your key to re synchronise and operate the remote central locking. you can do it at home you need the 4 dig code for you car if you have that get back to me and i will tell you how to do it i did mine at home owljay35@hotmaill.co.uk
What is a key in a box on the dash board mean?
In most cases it has something to do with central locking or a key code on the ignition.
How do you reset samsonite tsa lock?
Reset instructions for Samsonite TSA approved luggage lock (TSA002) Step 1. Use the default lock code 000 to unlock. Step 2. Turn the locking loop 90 degrees left with the dial numbers facing you. Step 3. Push and hold the locking loop down. Step 4. While holding the locking loop down against the internal spring reset the 3 digit code. Step 5. Release the locking loop. Step 6. Don't forget the new lock code. Step 7. Set locking loop into locked position and change the three digit numbers. Step 8. Lock should be locked. Step 9. Unlock- enter you new three digit code to unlock. L.G. Wall
How do you reset code when you have changed battery in key for atomatic locking can anybody help.?
Look in the owners manual. If it doesn't tell you then you will need to go to the dealership.
How do you cancel and reset code for chubb safebox?
Ring a locksmith if its locked. If its open press the p button then input your new code, input your new code again and it will set. Try it with the door open before shutting and locking it.
What is Facebook reset code?
facebook reset code
Disarm immobilizer Renault megane?
You require the 4 digit code from the dealership. You will need to enter this via the steering wheel stork or central locking button dependant on the model.
How do you reset code 1260?
how to reset nokia 1260 i forgot previous code
How do you reset the code on a Polo suitcase?
how to reset the code of polo team luggage
How do reset your samsung f219?
reset code
How do you find the code for a Saab 9000 stereo?
I reset the code after a dead battery and it was the wrong code, how can I reset it and /or find the corrrect code
