Ground out the # 7 pin in the data connector for 5 seconds. With the key in the acc position. Ground it out for 10 seconds to reset service light. BE SURE ITS THE RIGHT PIN. there numbered. EchoSai
Must be reset manually. Look in your owner's manual for instructions.
disconnect the battery for 1 minute and it will reset.
I reset the check engine light on my jeep by disconnecting it from the battery.
http://www.bmwe36blog.com/2007/02/24/reset-bmw-e36-oil-service-light/**new answer**There might be a small hole about the size of a pen tip on your dash near the instrument cluster. Usually if you press this with something that'll fit, it will go away.
hold milage reset button in and switch on ignition.hold for about 5 seconds and it will reset.
A person can reset the service engine light in a 1998 Tahoe by disconnecting the battery cables for 1 minute. After the battery cables are reconnected, the light should turn itself off.
You could try un hooking the battery.
Have vehicle scanned at auto parts to determine problem or have codes cleared
Disconnect the battery cable, wait few second that reconnect. That will reset the engine light but doesn't fix the problem. if the problem was not fixed the light will come back on.
Disconnect your battery, and leave it disconnected for at least 24 hours. The battery backup on the computer will die after 24 hours, at that point, the service engine indicator is reset.
you have to take it to a shop with a computer to reset it they have to go to threw the comptuer in the truck my 93 dodge is the same way. i just live with the light on.
2 ways, autozone can reset the light,no charge. But they can also tell you what the code # is and what you might need to repair it. Or you can disconnect the battery for approx. 5 Minutes, that should reset the cars computer.