It can be right next to the panel if you want. There is nothing in the code that says otherwise.
The panel and breaker have to be of the same manufacturer. This way the breaker will fit into the panel. If the panel has a push in bus bar, the breaker must also be the type to accept the bus bar. If the bus bars in the panel are of the bolt in type then the breaker also has to be a bolt in breaker.
No, a Cutler Hammer will not work in a GE panel or vice versa.
A 100-A sub-panel would be fed from a 100-A breaker.
Possibly. Depends on which model Siemens breaker you have.
5'6"
passenger panel, circuit breaker closest to the middle.
The panel and breaker have to be of the same manufacturer. This way the breaker will fit into the panel. If the panel has a push in bus bar, the breaker must also be the type to accept the bus bar. If the bus bars in the panel are of the bolt in type then the breaker also has to be a bolt in breaker.
Not circuit breaker only fuses in cars that are used. Driver side kick panel 7.5a gauge fuse check it fist.
It is inserting a breaker into a service panel.
Where is the circuit breaker for power window in 1990 camry?
only if listed in the panel board
No, a Cutler Hammer will not work in a GE panel or vice versa.
A 100-A sub-panel would be fed from a 100-A breaker.
If you are talking about a breaker in a house panel then a 15 amp breaker would be used. It is the smallest amperage breaker that you will find in a house panel.
Possibly. Depends on which model Siemens breaker you have.
The biggest circuit breaker in any home is the main breaker located in your main breaker panel that is installed where your electrical service cable comes into your home.
5'6"