Not long. 1 bolt on retainer & it just pulls out of block. Note firing order before you pull any wires. Find #1, go around cap terminals tracing them to each cylinder. Should be something like 1,8,5,3,6,4,7,2. Bump eng to tdc on damper so no. 1 firing. Use crank bolt & can do by hand (clockwise) Mark no 1 on cap. Note position of housing in relation to manifold & mark. Remove cap & note position of rotor to nearest ref point & mark. Now pull it & replace. When you drop it in the gears will mesh & will engage oil pump so will turn almost 1/4. Sometimes you have to turn oil pump slightly if it gets bumped. you can use a super long screwdriver & turn the slot.You may have to stab it in a few times to get it in right position. Now throw wires back on, start & set timing. have fun:)
The 1989 Chevy Caprice was 212.2 inches long (5,390 mm).
No it will not. To long.
how long does it take to replace a carburetor on a chevy truck?
The 1994 Chevrolet Caprice sedan had an overall length of 214.1 inches. The 1994 Chevrolet Caprice station wagon had an overall length of 217.3 inches.
As long as it's a comparable tire, yes (depending on what a "five bigger" Caprice is...)
10k or less
A Caprice steering column can be replaced by another as long as it matches. It if comes from another Caprice of that year, it will fit properly.
Yes as long as you run on the rims
Yes chevy caprice do run when battery is disconnected as long as the cars alternator is in working condition to keep the car goin once turned on.car won't turn on without battery just like any other.
yes, as long as the 454 is not a tall deck block.
its a 2 second job for my mechanic he does it in the blink of an eye
yes as long as you swap electric parts