answersLogoWhite

0


Best Answer

3 bundles per square

User Avatar

Wiki User

11y ago
This answer is:
User Avatar
More answers
User Avatar

Wiki User

12y ago

5 bundles

This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: How many bundles of wood shakes per square?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Related questions

How many cedar shakes are in a square?

A "square" of shakes covers 100 SF of wall or roof area. Beyond that - everything depends on the installation. The number of actual pieces of wood in a square varies greatly based on the exposure the installer wants to leave, and the width of the shakes, which are normally bundled random in width. A single handsplit shake is going to be 18" in length and be installed with an exposure anywhere from 4"-7" . It could be anywhere from 3-12" in width. It typically takes 4-6 bundles of shakes to get 100SF of exposure, but again that varies wildly based on the product and how it is installed. Note that cedar "Shakes" are typically hand-split and will vary greatly- whereas cedar "shingles" are machine cut and can be ordered in uniform width if desired.


If you need to carry 13 bundles of wood but can only carry 3 at a time What is the minimum number of trips you need to make?

That's quite easy,5 trips.What you do is guess and check.You carry 3 bundles of wood on your first trip so it can't be 1.On your second trip you would carry 6 so its not 2 trips either.3 trips would be 9 bundles of wood so its ot that.4 would be 12 bundles of wood but you need 13!So the answer is 5 trips because 5x3=15.2 more bundles of wood than what you need.


If you have 200 linear feet of wood 2.25 inches wide how many square feet of wood do you have?

37.5 square feet.


Paul needs 13 bundles of wood He can only carry 3?

Five


How many square feet in cord of wood?

none


How many square feet in a bundle of asphalt roof shingles?

Multiply the length by the width of one side of a gabled roof and then multiply by the slope (pythagorean theorm; e.g. 9 squared + 12 squared = 15 squared) and double it (two sides to a roof). This suare footage will give you the amount to divide by a bundle of shingles which covers 32 sq. ft.


Colonies used what for shingle?

Thatch first and wood split shakes later.


Paul needs 13 bundles of wood He can only carry 3 at a time What is the minimum number of trips Paul needs to make?

Paul needs 13 bundles of wood He can only carry 3 at a time What is the minimum number of trips Paul needs to make?


How many bundles of wood in a face cord?

A cord of wood measures 8 x 4 x 4 (128 cubic ft.) A face cord varies tremendously in volume, but assuming it is 8 ft. long, 4 ft. high and about 12 in. wide: a face cord of wood is roughly 43 cubic feet. Bundles of wood vary as well, ranging from .9 cubic ft. to 1.5 cubic ft. You do the math.


How many square feet in a piece of wood 67 inches x 54 inches?

Approx 25.13 square feet.


Where is the cambium located in the plant?

It is located in the vascular bundles between the primary xylem (wood) and primary phloem (bast) tissues.


Where is the location of cambium in plant?

It is located in the vascular bundles between the primary xylem (wood) and primary phloem (bast) tissues.