0
about 500 people
Wiki User
∙ 13y ago
Add your answer:
Earn +20 pts
Is blast furnace a batch furnace?
A blast furnace runs continuously, and input materials are continually dumped in at the top to make their way down through the furnace. Shutting down a blast furnace for relining or other work is a major event in its life.
Can you use a down draft as an updraft furnace?
yes u can if u are good with duct work put a down draft furnace in a basement and pipe it up one floor well not recommended it will work i did this to help a lady get threw winter who had low funds and it has worked quite well u need to build a custom box for the furnace to sit on to make this work and pipe directly from box and use smallest duct work u can i.e mobile home duct work or 4 to 6 inch What you did is still a downdraft furnace
How many people work at a hydroelectric powerplant?
the answer to your question is that OVER 9000! people work in a hydroelectric powerplant.
Will a 4 ton condenser unit work with a 3 ton furnace?
not very well. a 4 ton system needs about 1600 cfm to provide it's full capacity of cooling. a 3 ton furnace puts out about 1200 cfm. in addition, the evap coil typically attached to the furnace needs to match the tonnage of the outdoor unit. so, the evap coil must be 4 tons. If you currently have a 3 ton furnace and evap coil, the system will not work, and you will most likely ruin the compressor in the outdoor unit.
How many people work in technology?
About half of them.
Is blast furnace a batch furnace?
A blast furnace runs continuously, and input materials are continually dumped in at the top to make their way down through the furnace. Shutting down a blast furnace for relining or other work is a major event in its life.
How many people work the furnace on a steamboat?
It takes about 5 to 10 men to work a steamboat furnace
Why can't aluminium be extracted from aluminium ore using a blast furnace?
Because it is more reactive then carbon to be extracted in a blast furnace. Remember carbon is the reducing agent and for it to work the metal being extracted has to be lower in the reactivity series, e.g. iron
Does Pokemon Rumble Blast work on dsixl?
no the game pokemon rumble blast doesn't work on dsiXL
What is the significance of tracking the use of wet injection in blast furnace linings?
As a technical researcher who has worked in China's Speed Steel supply chain for 8 years, he is relatively familiar with this technology. The blast furnace lining wet injection technology can complete a 5500m³ blast furnace lining repair in a very short time (48h). And the service life can reach more than 1.5 years. This rapid maintenance mode has been fully recognized by most blast furnace users and plays a huge role in China's green ironmaking technology. The core of wet injection technology is "injection" rather than "spray". "Injection" means pouring without mold, and the effect of pouring is achieved by spraying. At present, the market is flooded with various wet spraying technologies and products, most of which are the dry spraying model, and the work is completed by spraying the material on the inner wall. In fact, concrete spraying technology has been developed in the construction industry for more than 100 years, and the spraying of unshaped refractory castables is not more complicated than building materials. It's easy to "spray out and stick to the wall" material, but it goes against the idea of wet injection of blast furnace linings. For the non-slab wall combined with the blast furnace cooling stave, the inner lining basically fell off during the middle repair, and there are still residual materials in the brick-inlaid groove of the cooling stave. Even if the smooth metal lining is not repaired, it can still keep going straight after the furnace is opened. The success of injection lining of a blast furnace is not simply to observe whether the blast furnace runs straight after opening, nor whether the surface is smooth or not after injection lining, but the actual data reflected after opening the furnace. The role of the blast furnace lining is to protect the cooling stave, and it is also the key to preventing excessive energy loss in the blast furnace. Under normal circumstances, the coke ratio and the comprehensive fuel ratio of the blast furnace will drop significantly after the injection lining is opened. Based on a large amount of practical experience, this reduction rate is about 15% to 18%; and the judgment of the life of the injection lining can also be inferred from these data. In order to achieve the effect of wet injection, a uniform stirring material and a stable pumping speed are required. The distance and angle between the gun head and the wall surface, the feeding amount, the feeding speed, the gas feeding amount and the coagulation accelerator amount, etc., the output will be stable when the injection material has the characteristics of the casting body. In the actual implementation process, the operator needs to be flexibly adjusted, so the early business training is very important. A good spray interface is not as smooth as a plastered surface, but rough and the particles are clearly visible. The steps of wet spraying can only be done from bottom to top like pouring, and cannot be sprayed piece by piece. Furnace shape, not longevity. The energy saving and consumption reduction of blast furnace is not simply to choose low-cost refractory materials. The development direction of wet injection technology is still more efficient, energy saving and longevity. Only by respecting research and development, technology, and market, rather than blindly imitating, can we promote the progress of core technology and obtain good market applications. Even if the smooth metal lining is not repaired, it can still keep going straight after the furnace is opened. The success of a blast furnace injection lining.
How is a gas furnace work?
Your grammar is horrible.
What do you need to get a furnace to work?
A source of heat.
Does fat burning furnace work?
Yes, fat burning furnace works. Based on reviews by participants.
Who is the author of the book 'Out of This Furnace'?
Out of This Furnace is an historical novel and the best-known work of the American writer Thomas Bell (1903
Do you have to purchase a new furnace to get central AC or can central AC be added with an existing furnace using the existing duct work?
My parents did it with existing ductwork.
Why do we need to extract iron from it's ore?
We extract iron form it's ore so that we can use it for a lot more things. For Example, this process makes wrought iron which can be used for ornamental work in gates. A lot of the iron from the blast furnace can be made into steel. Useful website: gcsescience.com
Can you use a down draft as an updraft furnace?
yes u can if u are good with duct work put a down draft furnace in a basement and pipe it up one floor well not recommended it will work i did this to help a lady get threw winter who had low funds and it has worked quite well u need to build a custom box for the furnace to sit on to make this work and pipe directly from box and use smallest duct work u can i.e mobile home duct work or 4 to 6 inch What you did is still a downdraft furnace
